0-50mg/L Online Phosphate Analyzer Water Analyzer Instrument RS485 interface
Online Water Quality Phosphate Analyzer
>>Application
With the increasing standards of power plants and the requirements of desalination and water purification projects, the timeliness and accuracy of phosphate monitoring have significantly improved. Particularly, the widespread adoption of low-phosphorus treatment technology has made the measurement accuracy of low-concentration phosphate even more critical. The AG9282C Phosphate Analyzer developed by our company utilizes a photometric dosing method, cold light source spectrophotometric measurement, and a dead-volume-free reaction cell, ensuring precise and reliable instrument performance.
>>Features
▪ Photometric dosing method enables precise reagent measurement.
▪ Cold light source spectrophotometry extends the lifespan of the light source.
▪ Automatic light intensity adjustment ensures measurement accuracy even after light source attenuation.
▪ Large-capacity memory stores measurement data for up to 5 years.
▪ 7-inch touchscreen color LCD offers intuitive operation and display.
▪ 4 isolated current outputs configurable for any channel, range, or PID.
▪ 4 relay outputs programmable for over-limit alarms, sample-loss alarms, or system fault alarms.
▪ RS485 interface supports remote data monitoring.
▪ Historical data and trend curves accessible for any specified time period.
>>Technical Parameter
|
Specification |
Detail |
|
Measurement range |
0-50mg / L OEM |
|
Instrument display value error |
±1%F.S |
|
Repeatability |
≤1% |
|
Measurement period |
minimum of 20 min |
|
Stability |
Baseline drift:Use a blank calibration without compromising accuracy |
|
Chemical drift:not more than 1% reading / month (depending on reagent stability) |
|
|
Type of reagents |
1 kinds |
|
Temperature Sensor |
PT 100 |
|
Temperature measurement range |
(0.0~60.0) ℃ |
|
Temperature measurement accuracy |
± 0.5℃ |
|
Temperature compensation range |
(0.1~60.0) ℃ |
|
Isolate the output signal and load |
4 ~ 20 mA (RL <500 Ω) |
|
Alarm contact capacity |
normally open contact AC220V / 3A, DC24V / 5A |
|
Working conditions |
Temperature:0~45℃ Humidity: ≤85% |
|
Sample conditions |
Flow rate:100-300 mL/min Temperature:(5~50)℃ Pressure:14 KPa |
|
Permissible solid composition of water sample |
≤ 5 microns (no glue is allowed, no grease) |
|
Power supply |
AC220V± 10% 50Hz±0.5Hz power: 150W |
|
Instrument external dimensions |
height, 720, width, 460, depth, 360 (mm) |
|
Instrument opening size |
665x410mm |
>>Dimension
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.