MK30G14 V Control Mechanical Hydraulic Valve Steel High Safety
Rexroth MK30G14 V Hydraulic Control Valves offer high safety and precision for industrial applications. These steel valves are designed for reliability in demanding environments.
| Attribute | Value |
|---|---|
| Valve Type | Mechanical |
| Operating Temperature | 0-100°C |
| Weight | 2.5 lbs |
| Flow Rate | 10 GPM |
| Hydraulic System Type | Open Center |
| Dimensions | 5.5 x 3 x 2 inches |
| Valve Position | Normally Closed |
| Material | Steel |
| Seal Material | Nitrile |
| Port Size | 1/2 inch |
| Mounting Type | Threaded |
| Maximum Pressure | 3000 PSI |
- Built-in closed-loop feedback system with ±1% control accuracy
- Supports analog input (0-10V or 4-20mA) and digital signal conversion
- Dynamic adjustment of valve core displacement for precise flow and pressure control
- Maximum working pressure: 350 bar
- Response time ≤20 ms for high-speed operations
- Reduces overflow energy consumption by over 30% compared to traditional valves
- Dry servo motor and wear-free valve core reset structure
- Hydraulic force compensation mechanism for stability under pressure fluctuations
- IP67 protection rating for dust and water resistance
- Integrated OBE electronic components with no external amplifier required
- LED status display and fault diagnosis interface
- Supports multi-stage ramp control and characteristic curve correction
- Operates in -20℃ to +80℃ environments
- Nitrated/anodized valve body for corrosion resistance
- Compatible with mineral oil, water-based hydraulic oil, and other media
- Ensure oil port meets ISO 4401 standard
- Maintain ≤0.1 mm centering accuracy deviation
- Calibrate zero position and control curve during commissioning
- 24V DC power supply (±20% range)
- Recommended filters and reverse polarity protection
- Use shielded cables for signal lines
- Clean/replace first-level filter every 2000 operating hours
- Regularly check seal condition (NBR hardening)
- Monitor for abnormal vibration or leakage
- Cut system pressure before manual emergency operation
- Monitor hydraulic oil viscosity in high temperature environments
- Check for valve core sticking or sensor signal drift
This valve series is ideal for injection molding machines, engineering machinery, automated production lines, and other industrial systems requiring precise hydraulic control and energy efficiency.
A: Yes, we accept small orders. Please contact us for details.
A: Yes, we can arrange shipping worldwide. We can assist with logistics if needed.
A: We accept T/T, LC at sight, or 100% full payment.
A: Typically 15 days for MOQ quantities, depending on product and order size.
A: We usually provide quotes within 24 hours. Urgent requests can be prioritized.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.