Rexroth M-3SED6UK14 Hydraulic Proportional Valve with 15ms Response Time and ±0.5% Control Accuracy for Industrial Systems

Rexroth M-3SED6UK14 350CG24N9K4QMBG24 directional poppet valve with electro-hydraulic proportional control for precision hydraulic systems.

• Compact Design: Modular construction with small footprint for complex hydraulic system integration
• Rapid Response: Direct-acting proportional valve with response time under 15ms and integrated LVDT feedback
• Multi-Functional: Supports flow direction switching, flow adjustment, and system unloading operations
• High Pressure Rating: Reinforced materials withstand 110%-150% overload pressure capacity
• Low Leakage: FKM seals provide minimal reverse leakage with high temperature and corrosion resistance
• Precision Control: Electro-hydraulic proportional control with ±0.5% steady-state accuracy and CANopen communication

Pipeline Preparation: Thoroughly clean all pipes before installation to remove contaminants. Hot bent or welded pipes require pickling treatment.

Electrical Setup: Verify solenoid valve coil connections (24V DC) to prevent damage. Adjust valve core to intermediate position during mechanical zero position calibration.

Parameter Control: Maintain oil viscosity between 37-73cSt and temperature below 80°C. Limit high-pressure/high-speed operation to maximum 10% per minute.

Regular Maintenance: Replace hydraulic oil after initial 200 hours, then every 1000 hours. Maintain oil cleanliness at NAS 1638 Level 6 standard.

Spool Jamming: Check for oil contamination and use proper disassembly tools (R901500000) for cleaning procedures.

Solenoid Issues: Measure coil resistance (standard 20Ω±5%) and inspect wiring connections for proper installation.