Used XCMG LW600KV Wheel Loader 3.5CBM Bucket 220HP Engine Articulated Frame Construction Machinery
Used XCMG LW600KV Wheel Loader Product Introduction
This pre-owned XCMG LW600KV wheel loader is a versatile earthmoving machine a versatile mid-range loader for infrastructure construction, earthmoving, and logistics yard operations. Equipped with a 220HP horsepower Weichai WP10G220E23 Diesel diesel engine and a 3.5 bucket, this loader delivers dependable performance for construction material handling, aggregate stockpile management, truck loading, and site preparation tasks. The articulated frame steering provides excellent maneuverability in confined job sites, while the Z-bar linkage delivers strong breakout force for digging into compacted materials. This unit has been inspected and serviced by our workshop team with documented maintenance history, making it a cost-effective alternative to new equipment for contractors seeking reliable loading capacity with controlled capital expenditure.
XCMG LW600KV Technical Specifications
| Parameter | Specification |
|---|---|
| Brand & Model | XCMG LW600KV |
| Engine Model | Weichai WP10G220E23 Diesel |
| Rated Power | 220HP |
| Operating Weight | 18500 kg |
| Bucket Capacity (Standard) | 3.5 m³ |
| Rated Load | 6300 kg |
| Breakout Force | 190 kN |
| Max Dump Height | 3150 mm |
| Max Dump Reach | 1180 mm |
| Steering Type | Articulated Frame, Full Hydraulic Power Steering |
| Articulation Angle | ±38° |
| Transmission | Powershift / Countershaft, 4F+3R |
| Max Travel Speed | 38 km/h |
| Tire Specification | 23.5-25 (20PR) |
| Hydraulic System Pressure | 21 MPa |
| Hydraulic Cycle Time (Raise/Dump/Lower) | 6.0/1.5/3.5 s |
| Fuel Tank Capacity | 300 L |
| Overall Length | 8800 mm |
| Overall Width | 3000 mm |
| Overall Height | 3500 mm |
| Wheelbase | 3300 mm |
| Min Ground Clearance | 420 mm |
| Turning Radius (Outer) | 6400 mm |
Condition & Inspection Report
Our certified technicians have completed a comprehensive multi-point inspection of this XCMG LW600KV loader. The engine starts readily and maintains consistent idle, with compression values across all cylinders within acceptable tolerance. The powershift transmission engages each gear range without delay or abnormal noise. Hydraulic system pressure and flow rate were measured at the main pump outlet confirming rated output. The Z-bar linkage pins and bushings were checked with a dial indicator — all measurements are within service wear limits. Bucket cutting edge and side plates show normal wear consistent with aggregate handling duty — edge thickness remains above replacement threshold. All hydraulic cylinders were inspected for rod scoring and seal leakage; the lift arm cylinders and bucket tilt cylinder are dry and operate smoothly. Tires exhibit even wear patterns with no sidewall damage. The ROPS/FOPS cab structure passed visual weld inspection. Brake performance was verified on a test gradient.
Shipping & International Transport Solutions
This wheel loader can be exported via Ro-Ro (Roll-on/Roll-off) carrier service from major Chinese seaports including Shanghai, Tianjin, and Qingdao. For destinations where Ro-Ro service is not available, flat-rack container loading is arranged with the loader's ROPS canopy clearance verified against container height limits — mirrors and exhaust components are removed and packed separately when necessary. Prior to loading, the machine receives a complete exterior pressure wash, engine compartment cleaning, and undercarriage degreasing. Fluids are managed per IMO dangerous goods regulations. The loader is secured to the deck or rack with rated chain binders and wheel chocks at all four corners. Full export documentation package includes commercial invoice, packing list, certificate of origin (general CO, Form E, or Form F as required by destination country), and bill of lading. Approximate sea transit duration from China: Southeast Asia 5-10 days, Middle East 14-20 days, Africa 20-35 days, South America 25-35 days.
After-Sales Service & Support Commitment
Each wheel loader sale includes a detailed pre-delivery inspection report with actual measurement values documented by our technician team. We provide 7 days of remote technical support following machine arrival at the destination port, covering initial startup procedure, hydraulic system priming, daily maintenance checkpoints (grease points, fluid levels, filter locations), and instrument panel warning light interpretation. A recommended wear-part list with OEM-compatible reference numbers is supplied for filters, bucket cutting edges, bucket teeth, hydraulic hoses, and brake friction components. Through our international parts supply network, we can arrange express courier delivery of critical spare parts to most countries. For major component support, we maintain contact with authorized service centers for XCMG equipment in various regions and can facilitate introductions. Please note that as a used machine, it is sold in its current inspected condition, and we recommend buyers arrange a local heavy equipment technician for arrival commissioning.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.