Used XCMG XE900D Hydraulic Crawler Excavator 90000kg Operating Weight 4.5CBM Bucket 8500mm Dig Depth
Used XCMG XE900D Hydraulic Excavator Description
This pre-owned XCMG XE900D hydraulic crawler excavator is a heavy-duty large excavator purpose-built for mining rock excavation, quarry primary breaking, and bulk material loading onto articulated dump trucks. Powered by a 560HP Weichai WP13G560E302 Diesel diesel engine and riding on a robust crawler track undercarriage, this machine delivers dependable digging force and lifting capacity for earthmoving, trenching, foundation excavation, and demolition applications. The hydraulic system features a load-sensing variable displacement pump arrangement that provides responsive control and fuel-efficient operation under partial-load conditions. This unit has been maintained under a structured preventive maintenance program, with hydraulic oil analysis, engine service records, and undercarriage wear measurements documented in the service history file. It represents a practical investment for earthmoving contractors seeking a reliable used excavator with verified mechanical integrity.
XCMG XE900D Technical Specifications
| Parameter | Specification |
|---|---|
| Brand & Model | XCMG XE900D |
| Engine Model | Weichai WP13G560E302 Diesel |
| Rated Engine Power | 560HP |
| Operating Weight | 90000 kg |
| Bucket Capacity (Standard) | 4.5 m³ |
| Maximum Digging Depth | 8500 mm |
| Maximum Dumping Height | 8300 mm |
| Maximum Digging Reach (Ground) | 13500 mm |
| Bucket Digging Force (ISO) | 420 kN |
| Arm Digging Force (ISO) | 320 kN |
| Swing Speed | 7.0 rpm |
| Max Travel Speed (High/Low) | 4.2/2.5 |
| Gradeability | 35°/70% |
| Ground Pressure | 0.095 MPa |
| Track Shoe Width | 800 mm |
| Track Length (Ground Contact) | 5600 mm |
| Hydraulic System Main Pump | 2* Variable Piston |
| Main Pump Flow Rate | 2*500 L/min |
| Hydraulic System Pressure | 35 |
| Fuel Tank Capacity | 1000 |
| Hydraulic Oil Tank | 600 |
| Counterweight | 12000 |
| Tail Swing Radius | 4100 |
| Overall Length (Transport) | 13500 mm |
| Overall Width | 4000 mm |
| Overall Height (Boom Up) | 4200 mm |
| Cabin Type | ROPS/FOPS Certified, Air Conditioning, Adjustable Suspension Seat |
Machine Condition & Inspection Report
This XCMG XE900D excavator has been evaluated by our certified heavy equipment technicians with the following key findings: engine compression values across all cylinders within 8% of factory specification; turbocharger inspected with shaft end-play within manufacturer limits; hydraulic main pump flow output verified on test bench at rated pressure; all hydraulic cylinders (boom, arm, bucket) cycle-tested through full stroke with zero drift observed during 20-minute static hold; swing bearing backlash measured at 0.8mm (within 1.5mm service limit); track link pitch elongation measured at 3 locations with average wear below 30% of replacement threshold; sprocket tooth profile shows normal polished wear without hooking; idler and track roller flanges within service limits; the cab structure passed visual inspection with intact glass and door seals; all instrumentation, camera display (if equipped), and warning systems functional.
International Shipping & Transport Solutions
This excavator is suitable for export via break-bulk cargo vessel, flat-rack container, or Ro-Ro carrier depending on the destination port capabilities. The machine will be professionally prepared for ocean transport: thorough pressure washing of the entire machine including undercarriage, engine bay degreasing, arm and boom hydraulically positioned and secured with locking pins, track frames blocked with timber dunnage, all fluids managed per IMO regulations (fuel drained to minimum, hydraulic and engine oil retained with caps secured), battery disconnected, and exposed cylinder rods coated with anti-corrosion protective compound. Lashing chains rated for the machine weight will secure the excavator at designated tie-down points on the track frame and carbody. Complete export documentation will be provided: commercial invoice, packing list, certificate of origin (Form E/Form F as applicable), and ocean bill of lading. Estimated transit times from Chinese ports: Southeast Asia 5-10 days, Middle East 14-20 days, Africa 20-35 days, South America 25-35 days, Oceania 15-22 days.
After-Purchase Support & Service
Each excavator purchase is accompanied by a detailed pre-delivery inspection report documenting all test measurements and observations. We provide 7 days of remote technical support after the machine arrives at your destination port, covering initial startup procedure, hydraulic system priming and bleeding, undercarriage track tension adjustment, daily maintenance checkpoints including grease fitting locations, fluid level inspection points, and filter element locations. A comprehensive recommended spare parts list with OEM-compatible reference numbers is provided for: engine oil filters, fuel filters, hydraulic oil return and pilot filters, air filter elements, bucket teeth and adapters, track shoe bolts and nuts, and hydraulic hose assemblies. Through our established parts supply network, we can arrange express international courier delivery for critical components. Buyers are encouraged to perform an arrival inspection and fluid analysis, and we can recommend compatible service providers familiar with XCMG equipment for local support. This machine is sold as inspected used equipment.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.