High Sensitivity Non-Methane Total Hydrocarbon Analyzer FID Technology NMHC Analyzer Total Hydrocarbon Concentration Tester

Price Negotiable
Price: Negotiable
MOQ: 1
Delivery Time: Negotiable
Brand: LONROY
Product Description

High Sensitivity Non-Methane Total Hydrocarbon Analyzer FID Technology NMHC Analyzer Total Hydrocarbon Concentration Tester

Product Description

Product Introduction

The LR-G103 Non-Methane Total Hydrocarbon Analyzer utilizes hydrogen flame ionization detection (FID) technology, offering high sensitivity and excellent stability.  It features multiple selectable measurement ranges, capable of measuring trace hydrocarbons in high-purity gases to LEL (Lower Explosive Limit) levels in various gases. It is suitable for real-time analysis of total hydrocarbon concentration and lower explosive limit (LEL) in various organic gases.

 

Typical Application Areas

> Total hydrocarbon measurement in industrial process gases

> Gas concentration monitoring at the inlet and outlet of exhaust gas treatment devices (RTO/RCO/incinerators, etc.)

> Real-time monitoring of total hydrocarbons in emission purification and chemical cleaning plants

> Monitoring of total hydrocarbon content in liquid oxygen of air separation units

> Real-time monitoring of organic compound concentration at the outlet of catalytic, biological, and activated carbon treatment devices

> Real-time monitoring of total hydrocarbons in crude coal gas conversion to clean gas

> Real-time monitoring of total hydrocarbons (or other organic compounds) in workshop, plant area, plant boundary, and ambient air

> Monitoring and early warning of organic compound leakage during production processes

> Real-time monitoring of total hydrocarbons in emission purification and chemical cleaning plants

> Monitoring of total hydrocarbon content in liquid oxygen of air separation units

> Monitoring and early warning of the lower explosive limit of solvent-saturated air

 

Product Features

> Fast response time: T90 < 2S, total response time < 5S

> Built-in heating pump, suitable for low-pressure sampling conditions

> The entire system is heated to prevent condensation and adsorption of organic compounds in the sample gas

> High measurement accuracy, better than 1% F.S.

> Built-in EPC flow control for stability

>Response factors for various hydrocarbons are close to 1, resulting in stable and high-precision measurements

High Sensitivity Non-Methane Total Hydrocarbon Analyzer FID Technology NMHC Analyzer Total Hydrocarbon Concentration Tester

Technical Specification

Measured components

Total hydrogen, non-methane total hydrocarbons, explosive limit (LEL)

Detection range

LEL: 0-100%

Detection limit

0.1 ppm

Analyzer heating

120℃~180℃

Sampling flow rate

0.5 SLM-1.5 SLM

Repeatability

≤1%

Response time

T90 < 2S, total response time < 5S

Zero drift

≤±2%F.S./24h

Span drift

≤±2%F.S./24h

Linearity error

≤±1%F.S

Communication Protocol

Modbus communication protocol

Operating Environment

5℃ ~40℃, 0~95% RH

Sample Gas Pressure

80 kPa-110 kPa

Power Supply

220 VAC, 50Hz

Hydrogen

Purity >99.99%, supplied from hydrogen cylinder or hydrogen generator, pressure 0.4 MPa

Air

Clean air, hydrocarbon concentration ≤0.3 mg/m³, pressure: 0.4 MPa

Driving Gas

Compressed air, free of water, dust, pressure: 0.4 MPa

Calibration Gas

Methane/propane single or mixed calibration gas, 0.2 MPa

Instrument Power

Startup 500W, Running 150W

Instrument Dimensions

500 × 482 (435) × 213 mm

Instrument Weight

21 kg

 

Get in Touch

Have questions about our products or want to discuss a custom order? Our team is ready to help you.

Company DONGGUAN LONROY EQUIPMENT CO LTD
Location A31, 11 Floor, No 1 Building, Minjian Jinrong Building, No 111 Guantai Road, Sanyuanli Community, Nancheng Street, Dongguan, Guangdong, China
Contact Person Kaitlyn Wang

Request A Quote

Please check your email address.
Your message must be at least 20 characters.