Petroleum Tester

ISO 2137 ASTM D217 Automatic Oil Needle Penetration Tetser Bitumen Grease Cone Penetrometer 1. Product Introduction Automatic Oil Penetrometer is designed and manufactured according to the relevant provisions of the national standard GB/T269-91 "Cone penetration test of lubricating grease and petroleum grease" and GB/T4509-84 "Petroleum asphalt needle penetration test" for petroleum product testing methods. This instrument also complies with the transportation industry

Intelligent Automatic Auto-ignition Point Tester Self-ignition Point Measuring Instrument Test Machine 1. Overview Applicable standards for PKR803 self-ignition point measuring instrument: GB/T5332 ignition temperature test method for ignition temperature of combustible liquids and gases, GB/T 21791-2008 Petroleum products self-ignition temperature determination method, DL/T706-1999 IEC79-4, suitable for determining the self-ignition point of petroleum products and gases, and

Lab equipment Lubricating Oil Anti Emulsifying Performance Tester 1. Overview The PCR502B type lubricating oil demulsibility performance tester is designed and manufactured in accordance with GB/T8022 "Test Method for Demulsibility of Lubricating Oils". It is suitable for determining the ability of medium and high viscosity lubricating oils to separate from water. 2. Technical index 1. Applicable standards: comply with the current effective standards of GB / T 8022 2. Host

Automatic Capillary Cleaning Machine Tester Test Machine The PMX120 automatic capillary cleaning machine is done by cavitating in the liquid. The generated electrical signal, through the transducer into the cleaning liquid, will continue to rapidly form and quickly close countless tiny bubbles, the strong mechanical force generated by this process, constantly impact the surface of the object, coupled with the ultrasonic wave in the liquid to accelerate the dissolution and

Engine Fuel Actual Gel Tester Actual Colloid Tester for Engine Fuel 1. Introduction This instrument is designed and manufactured in accordance with the requirements of the national standard of the People's Republic of China GB/T 8019-2008 "Determination of fuel colloid content by injection evaporation method". It is suitable for the determination of the actual colloid content in aviation fuel by the method of steam evaporation medium according to the standard. Select the

ASTM D92 ISO2592 Intelligent Open Flash Point and Ignition Point Tester The PCK208A intelligent opening flash point and ignition point tester is designed according to the relevant provisions of the "National Standard of the People's Republic of China - Determination of Flash Point and Ignition Point of Petroleum Products - Cleveland Open Cup Method - GB/T 3536-2008", "ASTM D92" and "ISO2592-2000", and adopts microprocessor control technology combined with true color

ASTM D 7525 ASTM D 7545 Intelligent Trace Oxidation Stability Tester 1. Overview The instrument initiates an extremely fast artificial aging process to assess the oxidation stability of liquid fuels (gasoline, diesel, biodiesel, fatty acid methyl esters and oil blends). The results include all volatile and non-volatile oxidizing substances, so that a complete analysis of the oxidation stability of the sample can be performed in a very short time. 2. Standard Method ASTM D

Automatic Condensate Pour Point Tester Automatic Coagulation Tester 1. Overview This tester is a fully automatic instrument for low-temperature performance measurement according to the standard test method ASTM D7683. PCNQ601C integrates many new technologies. Its compact body has an ultra-fast cooling speed and a cooling depth of -90°C. It does not require any additional cold source and uses a safe and environmentally friendly metal bath, which eliminates the environmental

ASTM D93 Pensky-Martens Intelligent Opening Flash Point Tester 1.Overview PCK208 type intelligent opening flash point automatic tester is in accordance with the national standard of the People's Republic of China - Determination of flash point and ignition point of petroleum products_ Cleveland open cup method -GB/T 3536-2008, ASTM D92, ISO2592-2000 relevant provisions, It is designed by using microprocessor control technology and true color touch liquid crystal display

Freezing Point Cold Filter Point Tester Liquids Freezing Point Tester For oil product The operating conditions under which the instrument is used 1. The instrument should be placed on a flat and firm workbench, and air convection should be reduced as much as possible in the environment. 2. This product involves flammable materials, and no open flame (or device that produces sparks) is allowed to be close to the surrounding during operation. 3. When the instrument is not in

Insulating Oil Dielectric Loss and Resistivity Tester Volume Resistivity Test Machine Laboratory Resistivity Test Equipment Product Description Product Introduction This instrument is a new generation fully automatic portable insulating oil dielectric loss and resistivity tester designed according to the national standard GB/5654. It can simultaneously measure oil dielectric loss and volume resistivity, and features simple operation and accurate and reliable test data. Main

Liquid Dielectric Volume Resistivity Tester Insulating Oil Volume Resistivity Test Machine Oil Volume Resistivity Test Equipment Product Description Product Introduction This liquid dielectric volume resistivity tester conforms to the DL/T421-1991 "Method for Determination of Volume Resistivity of Insulating Oil" standard and is suitable for measuring the volume resistivity of insulating oil and fire-resistant oil. It can be widely used in power, petroleum, chemical, railway,

Automatic Oil Dielectric Loss and Volume Resistivity Tester Liquid Insulating Materials DC Resistivity Test Machine Product Description Product Introduction The automatic oil dielectric loss and volume resistivity tester is designed and manufactured according to the GB/T5654 standard, "Measurement of Relative Permittivity, Dielectric Loss Factor and DC Resistivity of Liquid Insulating Materials". It is used for measuring the dielectric loss factor and DC resistivity of liquid

ASTM D86 ASTM D850 Fully Automatic Distillation Boiling Point Determination Instrument Oil Distillation Boiling Range Analyzer Product Introduction The fully automatic distillation boiling point determination instrument is designed and manufactured in accordance with the requirements stipulated in GB/T 6536-2010 "Determination Method for Normal Pressure Distillation Characteristics of Petroleum Products", GB/T 7534-2004 "Boiling Point Determination of Industrial Volatile

ASTM D5800 Touchscreen Lubricant Evaporation Loss Tester Noack Method Laboratory Lubricating Oil Evaporation Loss Analyzer Product Introduction The lubricant evaporation loss tester is designed and manufactured in accordance with the requirements of the Chinese petrochemical industry standard SH/T0059-2010 "Test Method for Evaporation Loss of Lubricants (Noack Method)" and the requirements of ASTM D5800 B method. It does not require a special instrument made of wood alloy.

Engine Fuel Actual Gum Analyzer Laboratory Fuels Actual Gums Tester Gasoline Actual Gum Measuring Machine Product Introduction The actual gum content tester is designed and manufactured in accordance with the requirements stipulated in GB/T 509 "Method for Determination of Actual Gum Content of Engine Fuels". This instrument is suitable for determining the tendency of fuel (gasoline, kerosene, diesel) to form gum when used in engines. It is equipped with a dedicated oil-free

ASTM D2699 EN ISO 5165 Octane Number Tester Cetane Number Analyzer ASTM D2700 ASTM D4737 Gasoline Octane Number Test Machine Product Introduction The octane number and cetane number analyzer adopts international technical measurement principles. It is designed and developed based on the diversity of domestic oil products, filling the gap in the detection of various oil types. It can quickly detect the octane number of gasoline and the cetane number of diesel. It has digital

ASTM D5293 Apparent Viscosity Analyzer Engine Oil Apparent Viscosity Tester Color LCD Touch Screen Apparent Viscosity Meter Product Introduction This instrument complies with the standards of GB/T 6538 and GB/T 6538-2000, which specify the method for determining the apparent viscosity of engine oil using the cold start simulator (cold start simulator method), as well as the standards of ASTM D5293, etc. It is suitable for measuring the apparent viscosity of engine oil within

ISO 4402 ISO 11171 Oil Particle Contamination Detector ISO 4406 Fully Automatic Oils Contamination Particles Size Grade Tester Product Introduction The fully automatic oil particle contamination detector is suitable for the detection of particle contamination in hydraulic oil, lubricating oil, fire-resistant oil, insulating oil, gear oil, turbine oil, aviation kerosene, organic liquids and polymer solutions, etc. It is developed in accordance with standards such as GB/T18854

IEC 79 Oil Autoignition Point Tester Laboratory Spontaneous Combustion Point Analyzer Spontaneous Ignition Point Test Machine Product Introduction The auto-ignition point tester is developed in accordance with the national power industry standard DL/T706-1999 IEC79-4:95. It is used to determine the lowest temperature at which a combustion phenomenon occurs in the sample of operating oil or fire-resistant oil in a beaker. The heating temperature of the heating furnace is set