Fast Installation Corrosion Resistant Steel Structure House for High Seismic Zone Prefabricated Modular Home
Fast Installation Steel Structure Prefabricated house designed for quick assembly and reliable performance.
- Repeatable Disassembly: Designed for multiple assembly cycles while maintaining thermal insulation properties.
- Earthquake Resistant: Engineered steel structure specifically designed to resist building damage caused by major earthquakes.
- Energy Efficient: Advanced isolation materials including hypo-allergenic polyethylene foam or mineral foam provide exceptional energy efficiency, reflecting 97% of radiant heat penetration.
- Professional Installation: Installation follows technical specifications established by the destination country's requirements.
- Fast Delivery: First shipment dispatched shortly after contract signing and initial payment execution, with materials loaded in 40 or 20 feet closed dry ocean containers.
| No. | Sort | Members | Descriptions |
|---|---|---|---|
| 1 | Measurement | length Roof Single Span Wall Single Span Clear height Roof pitch |
customized customized customized KXD can do 3 stories buildings with light gauge framing system slope is 1:20(1.15°)~1:50(2.8°) |
| 2 | Specification | Roof | 5:12 Roof slope; Roof truss at 24" (609 mm) O.C. connected to wall tracks R30 Fiberglass insulation in the roof truss cavity 1/2"(12mm) OSB board on top of the truss chord Waterproof attached to OSB board Mason tile, corrugated metal tile, asphalt tile or terracotta tile shingle roofing (Standard) 1/2"(12mm) Gypsum board for inside ceiling |
| Exterior wall | 3.5" (89 mm) Wall studs spaced at 16" (406 mm) or 24" (609 mm) O.C. anchored to the foundation R13 Fiberglass Insulation in the wall stud cavity 1/2" (12 mm) OSB Board Covered On the Outside of the Stud Flange Breathing paper 5/16" (8mm) cement Siding on the Outside surface of the Exterior Wall Paint on the siding 1/2" (12mm) Gypsum Board on the Inside Surface |
||
| Interior Wall | 3.5" (89 mm) Wall studs spaced at 16" (406 mm) or 24" (609 mm) O.C. anchored to the foundation 5.5" (140 mm) Wall studs spaced at 16" (406 mm) or 24" (609 mm) O.C. in bathrooms for plumbing system 1/2" (12mm) Gypsum board or waterproof Gypsum board on both Sides of the wall frames Normal interior door, c/w frame and casing Wall tiles in part of Bathroom and Kitchen |
||
| Floor | 10" (250 mm) or 12"(300mm) Floor Joists spaced at 16" (406 mm) or 24" (609 mm) O.C 3/4" (18mm) OSB Board on floor joists 1/2" (12mm) Gypsum board for the ceiling Tiles in Bedrooms & living room Tile flooring in Bathrooms and Kitchen MDF Baseboard |
||
| Kitchen | Laminate Panel Cabinets c/w hinges & laminated panel doors (Standard) Brushed nickel handles & knobs on doors & drawers Granite countertops c/w backsplash Stainless sink c/w chromed goose neck faucet with sprayer |
||
| Bathroom | 60" (1524 mm) Bath tub c/w chromed shower faucets Toilet 1.6 Gal. per flush Granite countertop vanity Lavatories c/w chromed faucets Laminate Panel Cabinets c/w hinges & laminated panel doors (Standard) |
||
| Others | Steel stairs included Plumbing and Electrical pipes (wires) systems excluded |
||
| Channel | Galvanized Steel Plain Sheet press molding Material: Q235. Painted |
We are a steel structure building manufacturer located in Qingdao, China. We have built a strong reputation among our customers for professional, warm, and thoughtful service, understanding that long-term business relationships are built on quality control, competitive pricing, proper packaging, and reliable delivery times.
We are a factory, which allows us to offer the best and most competitive prices. Our factory covers an area of 150,000 square meters.
We have established comprehensive procedures to check products at all stages of the manufacturing process - from raw materials and in-process materials to validated/tested materials and finished goods.
Yes, we have more than 100 design engineers who can create full solution drawings according to your requirements. They utilize professional software including Auto CAD, PKPM, MTS, 3D3S, Tarch, and Tekla Structures (X steel) V12.0.
Yes, we can provide installation supervision and training services. We can send our professional technical engineers to supervise installation on overseas sites. Additionally, we maintain our own abroad installation guidance team consisting of more than 30 experienced professionals.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.