Wired Garage Door Opener Accessory Modern Infrared Gate Safety Beams 2 Wires Connection
garage door opener Photocell provides additional safety in the operation of your garage door by automatically stopping and reversing the movement of the door. It's project an invisible beam preventing the garage door from closing on people, pets or other objects.
Be sure power is NOT connected to the garage door opener BEFORE installing the safety beam.
To prevent SERIOUS INJURY or DEATH from closing garage door:
- Correctly connect and align the safety beam. This required safety device MUST NOT be disabled
- Install the safety beam is NO HIGHER than 6” (15cm) above garage floor.
The safety beam must be connected and aligned correctly before the garage door opener will move in the down direction.
The sending sensor(with a red LED) transmits an invisible light beam to the receiving sensor( with a green LED). If an obstruction breaks the light beam while the door is closing, the door will stop and reverse to the full open position
- Sensors are installed inside the garage, one on either side of the door.
- Sensors are facing each other with the lenses aligned and receiving sensor lens does not receive direct sunlight.
- Sensors are no more than 6 inches (15cm) above the floor and the light beam is unobstructed
The safety beam is attached to the door track, the sensors should be no more than 6 inches (15cm) above the floor.
Garage doors, residential doors, automatic doors
- Product inquiry and consulting support.
- Sample design and testing support.
- Welcome visit our factory at any time.
- Technical Support all the time.
Q1. Can I have a sample order for garage door opener?
A: Yes, we welcome sample order to test and check quality. Mixed samples are acceptable.
Q2. What about the lead time?
A:Sample needs 3-5 days, mass production time normally needs 20 days.
Q3. Do you have any MOQ limit for garage door openers?
A: Low MOQ, 1pc for sample checking is available.
Q4. How to proceed an order for garage door openers?
A: Firstly let us know your requirements or application.
Secondly We quote according to your requirements or our suggestions.
Thirdly customer confirms the samples and places deposit for formal order.
Fourthly We arrange the production.
Q5. Is it OK to print my logo on garage door opener?
A: Yes. Please inform us formally before our production and confirm the design firstly based on our sample.
Q6: Do you offer guarantee for the products?
A: Yes, we offer 2 years warranty to our products.
Shenzhen Zhongtian Doors Co., Ltd. specializes in the manufacture and engineering installation of remote control garage door operator series products and supply of related accessories with a number of high-quality software and hardware development and quality inspection personnel We have garage door-plate & hardware accessories manufacturing base and an advanced automatic production line in mainland China. Our products have passed the certifications of related authoritative quality inspection departments. With an annual output of over 300,000 square meter, we can satisfy clients according to their demands. We have over 10 high-quality installation technicians and instruct about 5000 installing projects in other places every year. We carry out about 1000 projects every year in the Pearl River Delta and some developed coastal cities of China. With strict installation specification and abundant field management experience, we can guarantee a good engineering installation effect, and we are deeply appraised by developers and users consequently.
Our company regards “reasonable prices, efficient production time and good after-sales service” as our tenet. We hope to cooperate with more customers for mutual development and benefits. We welcome potential buyers to contact us!
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.