Original Imported Rexroth Germany 28cc Displacement High Pressure Piston Pump with 100% Tested Great Performance and Up to 80°C Operating Temperature
A2FO80/61L-VQDN55
A2FO80/61R-VQDN55
A2FO90/61R-VUDN55
A2FO90/61R-PBB05
A2FO90/61L-PBB05
Original imported Rexroth Germany A2FO80 plunger pump hydraulic motor arm pump
| Brand Name | Rexroth |
|---|---|
| Place of Origin | Germany |
| Warranty | 12 Months |
| Video outgoing-inspection | Provided |
| Machinery Test Report | Provided |
| Application | Machinery Repair Shops |
| Material | Iron |
| Condition | Original |
| Quality | 100% Tested Great Performance |
| Certification | ISO |
| Feature | Long Life Low Noise |
| Function | Filter Diesel Oil |
| Power | Hydraulic Power |
| Payment Term | T/T 100% |
A2FO80/61R-VPB05-S
A2FO80/61R-VPB05-S
A2FO80/61R-VZB05
AA2FO80/61-NBD55
AA2FO80/61L-PQDN55
AA2FO80/61L-VQDN05-Y
AA2FO80/61L-VQDN55
AA2FO80/61L-VQDN55
AA2FO80/61R-VQDN05-Y
AA2FO80/61R-VQDN05I-S
AA2FO80/61R-VQDN55
AA2FO80/61R-VQDN55-E
A2FO90/61L-VBB05
A2FO90/61R-VBB05
A2FO90/61L-PAB05
A2FO90/61L-PAB05
A2FO90/61L-PAB05
A2FO90/61L-PBB05
A2FO90/61L-PBB05
A2FO90/61L-PBB05
A2FO90/61L-PBB05
A2FO90/61L-VAB05
A2FO90/61L-VBB05
A2FO90/61L-VBB05-S
A2FO90/61L-VBB05-S
A2FO90/61L-VBB05-S
A2FO90/61R-PAB05
A2FO90/61R-PAB05
A2FO90/61R-PAB05
A2FO90/61R-PBB05
A2FO90/61R-PBB05
A2FO90/61R-PBB05
A2FO90/61R-PBB05
A2FO90/61R-PBB05
A2FO90/61R-PBB05-S
A2FO90/61R-VAB05
A2FO90/61R-VAB05-S
A2FO90/61R-VAB05-Y
A2FO90/61R-VBB05
A2FO90/61R-VBB05
A2FO90/61R-VBB05
A2FO90/61R-VBB05
A2FO90/61R-VBB05-S
A2FO90/61R-VBB05-S
A2FO90/61R-VBB05-S
A2FO90/61R-VBB05-S
- High Power Density: Provides substantial power output relative to its size
- Compact Design and Small Dimensions: Saves space in equipment design
- High Overall Efficiency: Contributes to energy savings
- Robust Bearing Design: The drive shaft bearing is designed to meet the service life requirements of demanding applications
- One-Piece Piston with Piston Ring Seal: Contributes to reliable performance
- Economic Design: Offers a cost-effective solution
- Geometric Displacement per Revolution: 56.1 cm³/rev
- Rated Pressure: 35 MPa (350 bar)
- Peak Pressure: 40 MPa (400 bar)
- Speed Range: Approximately 500 to 3500 rpm (dependent on specific model and pressure)
- Flow Rate: Proportional to drive speed and displacement; approximately 112 L/min at nominal speed (e.g., 2000 rpm) and Δp=350 bar
- Mass: Approximately 18 kg
- A2FO56/61L-PPB05
- A2FO56/61R-PPB05-S
- A2FO56/61R-NPB05
- A2FO56/61L-VBB05
- Pre-Startup Check: Verify oil level in the tank before startup. Use the recommended grade of hydraulic fluid
- Initial Run: After a shutdown of more than 4 hours, allow the pump to run without load for at least 5 minutes before applying pressure
- Regular Monitoring: Consistently check operating parameters like pressure, speed, and, importantly, oil temperature during work. The optimal operating oil temperature is typically suggested to be between 35°C and 60°C. If a sudden temperature rise occurs, investigate the cause immediately
- Inspection: Regularly check pipe joints and flange connections for tightness to prevent leaks and air ingress
- Oil Cleanliness: Maintain the cleanliness of the hydraulic oil. The higher the oil cleanliness, the longer the service life of the pump. External contaminants must be prevented from entering the reservoir and the pump
- Low Drive Speed: Ensure the motor meets the pump's required rated speed
- Leaks in the System: Check the system for and repair any leakage points
- Aeration/Suction Problems: Inspect the suction line for air leaks. Ensure the oil level in the tank is not too low
- Loose Pump Casing Bolts: Prolonged operation and vibration can loosen bolts, which may need tightening to specification
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.