Moog Servo Valve with Up to 140 L/min Flow Rate 1A Rated Current and 24V 220V Voltage Electro-Hydraulic Proportional Control
Price:
2
MOQ:
1
Delivery Time:
2 weeks
Brand:
MOOG
Product Description
MOOG Electro-Hydraulic Servo Valve Series
D661-4594C, D661-4624, D661-4636, D661-4640, D661-4649, D661-4650, D661-4651, D661-4652, D661-4691C, D661-4697C
Product Specifications
| Parameter | Value |
|---|---|
| Rated Current | 1A |
| Voltage | 24V / 220V |
| Power | 0.1 kW |
| Brand | MOOG |
| Place of Origin | Germany |
| Application | LED touch control |
| Material | PVC, Steel, Copper |
| Rated Frequency | 50 Hz |
| Type | Servo proportional valve |
| Control | Electro hydraulic/Proportional |
| Construction Material | Advanced alloy steel/cast iron |
Compatible Models
Original MOOG: D661-2057, D661-205A, D661-318A, D661-363, D661-363A, D661-363D, D661-3702E, D661-4020B, D661-423A, D661-4491E, D661-450C, D661-450D-4, D661-473B, D661-4744, D661-4793, D661-515A, D661-5718, D661-5729, D661Z1718F, D661Z2742F, D661Z2743H, D661Z3726E, D661Z5604, D661Z6716, D661Z671C, D661Z736A, D662-1714G, D662-1942E, D662-2714E, D662-4348K, D662-5704, D662-580A, D662-5NC, D662-Z917G, D662E957A, D662Z4719B, D662Z902B, D663-1902E, D663-2709E, D663-344C, D663-344K, D663-363C, D663-4002, D663-5002, D663-814A, D663Z1713M, D663Z2706EF, D663Z270H, D663Z2770H, D663Z4712B, D663Z703G, D663Z954AB, D663Z954B, D663Z954C, D664-2708E, D664-375K, D664-519, D664-5302, D664-757A, D664E209C, D664Z1905F, D664Z4710B, D665-4007D, D665E5004, D682Z4706B, D682Z4709B, D682Z4809, D682Z4809G, D684E4715, D684Z4715B, D684Z47245, D684Z4724B, D684Z4733F, D684Z4815, D684Z4857G, D684Z4862, D688Z4701D, D688Z4701E, D688Z4702A, D688Z4705B, D691-2090D, D691Z2086D, D733-7368, D760-026A, D760-103A, D760-317A, D760-503A, D760-505A, D760-506A, D760-858A, D760-880A, D760-938A, D761-104, D761-2620, D761-532, D761-883, D765-1601, D770-801
Installation Requirements
- Filtration: Install a precision filter with a rating of 5 microns or less upstream of the servo valve. Maintain hydraulic fluid cleanliness at maximum ISO DIS 4406 Code 16/13 (Code 14/11 recommended).
- System Flushing: Thoroughly flush the entire hydraulic system before installation to remove contaminants. Use a flushing manifold and circulate fluid under normal operation conditions.
- Mounting: Can be mounted in any orientation with proper port alignment. Ensure mounting surface is clean, smooth, and flat. Torque screws to 96 inch-pounds.
- Connections: Use O-ring seal connections (SAE J1926). Prefer crimped or 24-degree cone type connections over welded fittings.
Troubleshooting Guide
| Symptom | Possible Causes |
|---|---|
| Servovalve does not follow input command | 1. Open coil or coil leads 2. Clogged inlet filter |
| Poor response | 1. Clogged inlet orifices or nozzles 2. Partially clogged filter 3. "Sticky" spool |
| No response to electrical signal | Shorted coil assembly |
| Low flow gain | 1. Incorrect null adjustment 2. Partially plugged orifice or filter |
Maintenance Guidelines
- Hydraulic Fluid: Maintain recommended cleanliness level. Change oil every six months and keep temperature between 40°C to 50°C.
- Filters: Monitor pressure drop across filters and replace elements periodically or when pressure drop becomes excessive.
- Regular Inspection: Check for electrical faults, mechanical failures (stuck valve spool, damaged springs, worn seals), and hydraulic issues (oil contamination, leaks).
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Quanzhou Yisenneng Hydraulic Electromechanical Equipment Co., Ltd.
Location
Nan'an, Fujian Province, China
Contact Person
liyun