4WRAE6W07-22/G24K31/F1V 4WRAE6E1-30-22/G24K31/F1V 4WRAE6E1-15-22/G24K31/A1V Rexroth German made hydraulic valve proportional solenoid directional valve
| Complete Model Example | Model Code Breakdown | Core Configuration Parameters | Release Status |
|---|---|---|---|
| 4WRE 6 E04-2X/V | 4WRE: Base Model 6: Nominal Size E: 4/3 3-position 4-way (spring-centered) 04: Rated Flow 4L/min (Δp=10bar) 2X: Component Series V: Seal Material (FKM Fluororubber) |
Valve Type: 4/3 3-position 4-way Flow Rate: 4L/min Seal: FKM Power Supply: Compatible with DC24V Interface: Supports ±10V/4-20mA |
Officially Released (Mass Production) |
| 4WRE 6 E08-2X/V | 4WRE: Base Model 6: Nominal Size E: 4/3 3-position 4-way (spring-centered) 08: Rated Flow 8L/min (Δp=10bar) 2X: Component Series V: Seal Material (FKM Fluororubber) |
Valve Type: 4/3 3-position 4-way Flow Rate: 8L/min Seal: FKM Power Supply: Compatible with DC24V Interface: Supports ±10V/4-20mA |
Officially Released (Mass Production) |
| 4WRE 6 E16-2X/V | 4WRE: Base Model 6: Nominal Size E: 4/3 3-position 4-way (spring-centered) 16: Rated Flow 16L/min (Δp=10bar) 2X: Component Series V: Seal Material (FKM Fluororubber) |
Valve Type: 4/3 3-position 4-way Flow Rate: 16L/min Seal: FKM Power Supply: Compatible with DC24V Interface: Supports ±10V/4-20mA |
Officially Released (Mass Production) |
| 4WRE 6 E32-2X/V | 4WRE: Base Model 6: Nominal Size E: 4/3 3-position 4-way (spring-centered) 32: Rated Flow 32L/min (Δp=10bar) 2X: Component Series V: Seal Material (FKM Fluororubber) |
Valve Type: 4/3 3-position 4-way Flow Rate: 32L/min Seal: FKM Power Supply: Compatible with DC24V Interface: Supports ±10V/4-20mA |
Officially Released (Mass Production) |
Connect a flow meter or pressure gauge to the valve's output, apply the minimum (4 mA/0 V) and maximum (20 mA/10 V) control signals, and adjust the zero and span potentiometers (on the amplifier) to match the desired flow/pressure.
Calibrate annually (or 2000 operating hours) to maintain precision, or if performance degradation is detected (e.g., inconsistent flow).
On-site calibration is possible with standard test equipment; factory calibration is recommended for critical applications requiring high accuracy.
Install a surge suppressor or accumulator in the system to absorb pressure spikes (limit spikes to ≤110% of the valve's maximum operating pressure).
Marine-grade models (with corrosion-resistant coatings) are available for saltwater environments; ensure compliance with marine safety standards (e.g., DNV GL).
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.