DBETR-1X/315G24K4M German original proportional relief valve Rexroth
Price:
Negotiable
MOQ:
1
Delivery Time:
2 weeks
Brand:
Rexroth
Product Description
DBETR-1X/315G24K4M German original proportional relief valve Rexroth
DBETR-1X/315G24K4M German original proportional relief valve Rexroth
Technical Specifications
| Parameter | Specification |
|---|---|
| Product Type / Function | Direct-operated proportional pressure relief valve, poppet design |
| Nominal Size | 6 |
| Component Series | 1X (10 to 19) |
| Set Pressure Stage | 315 bar |
| Maximum Operating Pressure | 350 bar |
| Maximum Flow Rate | 3 L/min (for pressure stage 315 bar) |
| Power Supply | 24 VDC (G24) |
| Electrical Connection | With component plug per DIN EN 175301-803 (K4), for proportional solenoid and position sensor (plug-in connector ordered separately) |
| Seal Material | NBR (Nitrile Rubber), suitable for mineral oil (HL, HLP) to DIN 51524 |
Related Products
Frequently Asked Questions
1. What is the set pressure stage of this valve?
The DBETR-1X/315G24K4M has a set pressure stage of 315 bar, which is the maximum settable pressure for this model. This distinguishes it from other models in the same series (e.g., 180 bar or 230 bar versions).
2. What is the maximum flow rate?
The maximum flow rate is 3 L/min at the 315 bar pressure stage. Note that actual flow may vary depending on system pressure, fluid viscosity, and other operating conditions.
3. What electrical connection does it use?
It uses a component plug per DIN EN 175301-803 (K4) standard for both the proportional solenoid and the integrated position sensor. The plug-in connector is typically ordered separately from the valve body.
4. What external control equipment is required?
An external amplifier (such as VT5003, VT-VRPD-1, or VT11025 series) is mandatory for operation. The amplifier provides the control signal, processes position feedback, and must be compatible with the 24 VDC power supply.
5. What hydraulic fluids are compatible?
The NBR (Nitrile Rubber) seals are suitable for use with mineral-based hydraulic oils conforming to HL and HLP classifications according to DIN 51524. Always verify fluid compatibility with your specific application requirements.
6. What should be considered during installation?
The valve is designed for subplate mounting according to ISO 4401-03-02-0-94 (CETOP D) standard. Ensure the hydraulic circuit is clean before installation, and perform bleeding (de-aeration) during initial commissioning to remove air from the system. Refer to the complete product documentation.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Quanzhou Yisenneng Hydraulic Electromechanical Equipment Co., Ltd.
Location
Nan'an, Fujian Province, China
Contact Person
liyun