DBET-52/50G24K4V Rexroth proportional pressure relief valve imported from Germany
Rexroth proportional pressure relief valve imported from Germany
| Parameter | Value / Description |
|---|---|
| Product Model | DBET-52/50G24K4V |
| Nominal Pressure Rating | 50 bar (maximum operating pressure at port P) |
| Supply Voltage | 24 V DC (±10%, 21 to 35 V DC permissible range) |
| Electrical Connection | 6-pin plug + PE, compliant with DIN 43563 standard |
| Protection Class | IP65 (dust-tight and protected against water jets) |
| Seal Material | FKM (fluorocarbon rubber, indicated by 'V' suffix) |
- DBETE-5X/315G24K31F1M
- DBETE-5X/350G24K31F1V
- DBETBEX-1X/310G24K31A1M
- DBETFX-1X/80G24-27NZ4M
- DBETFX-1X/180G24-27NZ4M
- DBETFX-1X/250G24-27NZ4M
- DBETFX-1X/315G24-27NZ4M
- DBETX-10/50G24-8NZ4M
- DBETX-10/80G24-8NZ4M
- DBETX-10/180G24-8NZ4M
- DBETX-10/50G24-25NZ4M
- DBETX-10/80G24-25NZ4M
- DBETX-10/180G24-25NZ4M
- DBETX-10/250G24-25NZ4M
- DBETX-10/315G24-25Z4M
- DBET6X/50G24K4V
- DBET6X/100G24K4V
- DBETB-6X/315G24K31A1V
- DBETB-6X/350G24K31A1V
- DBE6X-1X/80G24-8NZ4M
- DBE6X-1X/180G24-8NZ4M
- DBE6X-1X/80G24-25NZ4M
- DBE6X-1X/180G24-25NZ4M
- DBE6X-1X/315G24-25NZ4M
- DBEBE6X-1X/80G24K31F1M
- DBE10Z-1X/180XYG24-8NZ4M
- DBE10Z-1X/315XYG24-8NZ4M
- DBEB10Z-1X/180XYG24-37Z4M
- DBEB10Z-1X/315XYG24-37Z4M
- DBEBE10Z-1X/180XYG24K31A1M
- DBEBE10Z-1X/315XYG24K31A1M
- DBEME20DBEME30
- DBEME10-5X/50YG24K31M
- DBEME10-5X/100YG24K31M
- DBEME10-5X/200YG24K31M
- DBEME10-5X/315YG24K31M
- DBEME10-5X/350YG24K31M
- DBEME20-5X/50YG24K31M
- DBEME20-5Xyi00YG24K31M
- DBEME20-5X/200YG24K31M
- DBEME20-5X/315YG24K31M
- DBEME20-5X/350YG24K31M
- DBEME30-3X/50YG24K31M
- DBEME30-3X/100YG24K31M
- DBEME30-3X/200YG24K31M
- DBEME30-3X/315YG24K31M
- DBEME30-3X/350YG24K31M
- DBEE6-1X/50YG24K31M
- DBEE6-1X/100YG24K31M
- DBEE6-1X/200YG24K31M
- DBEE6-1X/315YG24K31M
The nominal pressure rating is 50 bar, and the maximum flow rate is 2 L/min at this pressure. For optimal performance and longevity, it's recommended to operate within these specified limits.
The valve operates on a 24 V DC power supply (permissible range: 21-35 V DC). The control input accepts an analog 0 to 10 V signal. Electrical connection is via a 6-pin plug with PE, compliant with DIN 43563 standard.
The valve has an IP65 protection class, making it dust-tight and protected against water jets. The ambient temperature range for operation is -20 °C to +50°C.
This model is compatible with mineral-based hydraulic oils (HL, HLP per DIN 51524 standards), with a viscosity range of 10-800 mm²/s. The seal material is FKM (fluorocarbon rubber), indicated by the 'V' suffix in the model number.
The typical response time for a full signal change is less than 70 ms. The hysteresis is typically ≤ 1%, ensuring precise pressure control with minimal deviation between increasing and decreasing pressure cycles.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.