Non Destructive Testing Inspection With Portable Industrial X Ray Machine RD-3005
Non-Destructive Testing and Inspection at Your Fingertips with Portable Industrial Xray Machine RD-3005
X Ray NDT Equipment/ NDT Radiographic Testing/NDT Flaw Inspection
NDT radiographic testing is a nondestructive testing (NDT)that uses x ray to examine the internal structure of some materials. The term NDT stands for non-destructive testing. This type of testing is often used in the manufacturing and aerospace industries. NDT X-ray testing can be used to detect a variety of different flaws, including cracks, porosity, and inclusions.
Introduction:
The RD-3005 is a compact, lightweight, and highly portable industrial X-ray flaw detector. Characterized by its strong penetration capability, time- and labor-saving operation, exceptional stability, and low failure rate, it is capable of continuous exposure for up to 15 minutes without requiring a 1:1 rest cycle. This unit is ideally suited for the radiographic inspection of chemical spherical tanks and large-diameter pipelines (utilizing the double-wall single-image technique), thereby boosting work efficiency by 50%. The device is highly portable, featuring a generator that weighs only 34 kg and boasts a sophisticated, compact design. This product series is available inboth directional and panoramic configurations, offering a maximum penetration depth of 50 mm in Q235 steel.
Main uses:
RD-3005the technical parameters
|
|
Project |
RD-3005 |
|
input |
Input power |
Single-phase AC150-250V 50/60Hz |
|
Power supply capacity |
No less than 3.0 KVA |
|
|
output |
X - ray tube voltage |
150~ 300 KVp |
|
X ray tube current |
5mA |
|
|
mA Stability degree |
± 1% |
|
|
Ray tube |
Focal size |
2.5× 2.5 |
|
X-ray irradiation range |
40±5° |
|
|
Ray generator |
working pressure Cooling mode Insulation way |
0.35MPa ~ 0.5Mpa Anode ground connection radiator Strong wind cold Gas insulation SF6 |
|
Size weight (kg) |
φ320×640 |
|
|
34 |
||
|
Maximum penetration |
Thickness steel A3(mm) |
50 mmFe(5 min) |
|
condition |
focal distance 600mm ,Agfa film,Double lead foil,Liquid temperature 22,Film density ≥1.5 |
|
|
|
sensitivity |
superior 2% |
|
controller |
Size weight Circuit |
325×270×180 < 9(kg) Automatic control and protection |
|
Environment |
working temperature relative humidity Altitude |
-30°~ +40° Not more than 85% Not higher 1500m |
|
methods |
fully automatic 4:1 Work and rest,Longest continuous exposure time 15mins |
|
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.