200kv Industrial X Ray Machine RD-T200 X Ray Generator With Xray Glass Tube
200kv Xray Inspection Machine Portable Industrial RD-T200 Xray Flaw Detector Generator with Xray Glass Tube Ndt
The RD-T200 Industrial X-ray Flaw Detector is engineered for agility. Built entirely from aluminum with an integrated cooling system, it weighs just 15kg—light enough for single-person carry and small enough to fit in tight spaces (only Φ200×635mm). Designed as a safer alternative to Se-75 radioisotope sources, it eliminates the logistical headaches of transporting radioactive materials across regions. Whether you’re working in cramped construction sites, small-diameter pipelines, or remote facilities, this unit delivers reliable radiographic imaging up to 25mm in A3 steel, giving you a critical operational edge.
Standout Benefits That Set RD-T200 Apart
- Se-75 Radioisotope Source Replacement: Say goodbye to radioactive material permits, transport risks, and regulatory headaches. The RD-T200 offers a safer, more flexible alternative without compromising performance.
- Ultra-Light & Compact for Confined Spaces: At just 15kg, this unit is built for agility—ideal for small-diameter pipelines, tight construction sites, and remote locations where heavy equipment can’t reach.
- Rugged Aluminum Build with Integrated Cooling: Lightweight doesn’t mean fragile. The aluminum construction and integrated cooling system ensure reliability and long service life, even in harsh field conditions.
- Low Operational Friction: No radioactive source handling, no complex logistics, no extra regulatory hoops. The RD-T200 simplifies your inspection process, saving you time and administrative costs.
Key Applications
- Confined-Space NDT Inspections: Small-diameter pipelines, narrow vessel interiors, and tight construction sites.
- Pipeline & Structural Weld Testing: Oil/gas transmission lines, utility pipelines, and thin-wall steel structure welds.
- Replacement for Se-75 Radioisotope Sources: Any project where transporting or using radioactive sources is impractical or regulated.
- Remote & Mobile Inspection Work: Field operations in remote areas, construction yards, and temporary sites where portability is key.
- General Industrial Fabrication: Quality control for small-to-medium steel components, pressure vessels, and structural parts.
RD-1803T the technical parameters
|
|
Item |
RD-T200 |
|
Input |
Input power |
AC220V± 10% 50Hz |
|
|
Power capacity |
Not less than 2.0 KVA |
|
Output |
X-ray tube voltage |
100~ 200 KVp |
|
|
X-ray tube current |
3mA |
|
|
mA stability |
± 1% |
|
Ray tube |
Focus size (mm) |
1.5× 1.5 |
|
|
Radiation angle |
45±5° |
|
Radiation generator |
Working pressure Cooling method Insulation method |
0.45MPa ~ 0.5Mpa Anode grounded radiator, strong air cooling Gas insulation SF6 |
|
|
Dimensions Weight (kg) |
Φ200mm´635mm(Including end rings) |
|
|
|
15 |
|
Maximum penetration |
Thickness Steel A3 (mm) |
25(5min) |
|
|
Conditions |
Focal length 600mm, Agfa film, double-sided lead foil sensitization, solution temperature 22 degrees, film blackness ≥ 1.5 |
|
|
Sensitivity |
Better than 2% |
|
Controller |
Dimensions Weight Circuit |
350mm×265mm×200mm < 8(kg) Automatic control and protection |
|
Environment |
Operating temperature Relative humidity Altitude |
-30°~ +40° No more than 85% No more than 1500 meters |
|
Method |
Fully automatic 1:1 mode of work and rest, the longest continuous exposure time is 5 minutes |
|
FAQ
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.