HS-ST-90/130/150 Industrial CT Scanning System
High-Resolution X-Ray CT Solution for Third-Party NDT Service Providers
90/130/150kV Optional
CMOS Detector
>500X Magnification
Product Overview
The HS-ST-90/130/150 is a high-resolution industrial computed tomography (CT) scanning system engineered for third-party NDT testing laboratories and independent inspection service providers. Featuring a configurable X-ray source with optional 90kV, 130kV, or 150kV tube voltage, a CMOS detector with 49.5μm pixel size and 1172×1260 pixel matrix, and a rotating swing arm with ±60° tilt, this system delivers exceptional imaging flexibility. The >500X system magnification and ≤10μm minimum focal spot ensure precise defect detection for the most demanding quality assurance applications.
Designed for commercial lab operations, the HS-ST supports a maximum load of Φ460×560mm and detection area up to 330×330mm. The integrated HS-CT software suite provides automatic void measurement for electronic components (BGA, QFN packages), image stitching for large PCB/PCBA inspection, and automatic CNC inspection with graphical result visualization. With a compact footprint of 1100×1100×2100mm and 380VAC 50Hz power supply, this system is ready for deployment in testing labs across the Middle East and GCC region.
Key Advantages for Testing Labs
⚡
Configurable Tube Voltage
Selectable 90kV, 130kV, or 150kV X-ray source with power ratings of 8W, 60W, and 65W. One platform serves electronics, composites, and metal components.
🔍
High-Resolution CMOS Imaging
CMOS detector with 49.5μm pixel size and 1172×1260 matrix. >500X magnification with ≤10μm focal spot for ultra-fine defect detection.
📊
Automatic Defect Analysis
Built-in automatic void measurement for BGA, QFN and electronic packages. CNC batch inspection with graphical result reports. Reduces manual review time significantly.
🌐
Middle East Ready
380VAC 50Hz power supply standard for GCC grids. Compact footprint fits standard lab spaces. Arabic/English software UI with regional service network across GCC.
🎨
Large Sample Capacity
Maximum load Φ460×560mm with 330×330mm detection area. Rotating swing arm with ±60° tilt for oblique angle inspection of complex geometries.
📦
Compact & Efficient
1100×1100×2100mm footprint, ~1500kg weight. Export carton 1300×1300×2300mm. Low total cost of ownership with industry-standard components.
Product Views
![HS-ST Industrial CT System - Lab Installation]()
HS-ST Industrial CT System — Lab Installation View
![HS-ST Industrial CT Scanner]()
HS-ST Industrial CT System — Front View
Overall System Status
| Dimensions W×D×H (mm) |
1100 × 1100 × 2100 |
Power Supply Voltage |
380VAC / 50Hz |
| Weight (kg) |
about 1500 |
Carton Dimensions W×D×H (mm) |
1300 × 1300 × 2300 |
X-Ray Source
| Tube Voltage (kV) |
90 / 130 / 150 (Optional) |
Maximum Output Power (W) |
8 / 60 / 65 |
| Tube Current (μA) |
0.1 – 500 |
Minimum Focal Spot Size (μm) |
≤ 10 |
Detector
| Detector Type |
CMOS |
Pixel Size (μm) |
49.5 |
| Maximum Tilt Angle |
Rotating Swing Arm: ±60° |
Frame Rate (fps) |
18 |
| Pixel Matrix (pixel) |
1172 × 1260 |
System Magnification (X) |
> 500 |
Software System
| Navigation and Positioning |
Enables rapid localization of physical objects. |
| Automatic Calculation |
Performs automatic void measurement for electronic components (such as BGA and QFN packages) and supports the generation of result reports. |
| Diverse Measurement Tools |
Supports geometric measurements including distance, angle, diameter, and polygons. |
| Image Stitching |
Supports image stitching and saving for large inspection samples like PCBs and PCBAs. |
| Automatic CNC Inspection |
Supports single-point and matrix-style addition for rapid project creation, with results visualized graphically. |
Motion Control System
| Maximum Load Dimensions (mm) |
Φ460 × 560 |
Maximum Detection Size (mm) |
330 × 330 |
Inspection Applications — One System, Multiple Revenue Streams
| Industry Sector |
Typical Inspection Tasks |
Middle East Demand |
| Electronics & Semiconductor |
BGA/QFN package void analysis, PCB solder joint inspection, chip package delamination, connector seating verification |
MEDIUM |
| Oil & Gas |
Pipeline weld integrity, valve casting porosity, drill bit wear analysis, flange gasket seating verification |
HIGH |
| Aerospace & Defense |
Turbine blade cooling channel inspection, composite delamination analysis, additive manufactured part validation |
MEDIUM |
| Automotive & EV |
Battery cell alignment, motor winding analysis, aluminum casting porosity, sensor assembly QA |
GROWING |
| Medical Devices |
Implant dimensional verification, catheter lumen patency, injection molding defect detection |
GROWING |
| Construction & Infrastructure |
Structural steel weld inspection, concrete core analysis, rebar positioning, anchor bolt integrity |
HIGH |
Middle East Market Readiness
| 🔌 GCC Power Compatibility |
Standard 380VAC 50Hz power input, fully compatible with GCC industrial power grids. No transformer or frequency converter required. |
| 📦 Gulf Port Logistics |
Direct shipping to Jebel Ali (Dubai), Dammam, and Jeddah ports. Export carton 1300×1300×2300mm with vacuum-sealed moisture barrier. Typical transit: 18–22 days. |
| 💻 Arabic UI & Documentation |
Full Arabic localization of HS-CT scanning and analysis software. Technical documentation, operation manuals, and training materials available in English and Arabic. |
| 🔩 Regional Service Support |
Authorized service partner in Dubai with factory-trained engineers. Remote diagnostics via secure VPN. On-site warranty support across all GCC member states. |
| 📚 GCC Standards Compliance |
GSO (GCC Standardization Organization) compliant design. Supports SASO, ESMA, and ADNOC inspection protocol documentation requirements. |
| 🏫 Local Reference Installations |
Installed base in UAE and Saudi Arabia. Reference site visits and demonstration scans available upon request for qualified buyers. Local training and application development support included. |
Start Your NDT Service Business in the Middle East
Contact us today for a customized quotation, sample scan report, or virtual demonstration.
✉ Request a Quote
🎦 Book a Demo
📄 Sample Report
HS-ST Series Industrial CT — Engineered for Commercial Testing Labs | 24-Month Warranty | ISO 9001:2015 Certified
