Automotive Interior Material Combustion Testing Machine Compliance With Standards: Complies With GB8410, American Standard FMVSS571.302, And DIN7520

Compliance with standards: Complies with GB8410, American standard FMVSS571.302, and DIN7520 "Combustion Characteristics of Automotive Interior Materials".
Test method: Place the sample horizontally on a U-shaped bracket. In a combustion chamber, ignite the free end of the sample with a flame of specified height for 15 seconds. Then, determine whether the flame on the sample has gone out, as well as the distance the sample has burned and the time it takes to burn that distance.
Scope of application: Mainly applicable to single materials or laminated composite materials used in automotive interior material parts, such as seat cushions, seat backs, seat covers, seat belts, headrests, armrests, folding roofs, all decorative backing plates, instrument panels, storage boxes, indoor cargo shelves, or rear window panels, curtains, floor coverings... ..
Technical parameters
Combustion chamber: Mirror-finish stainless steel plate structure, with a steel plate thickness of 1.2mm
Control box dimensions: 300mm(length)*270mm(width)*360m(height)
Combustion chamber dimensions: width x height x depth: 385x 360x 204mm
There are 10 ventilation holes with a diameter of 19mm at the bottom, and there are ventilation slots with a width of 13mm around the four walls near the top.
Test stand: Made of two U-shaped corrosion-resistant metal steel plates, with dimensions of 361x100mm in length and width
Control box: Combustion time: 0-99.99/S/M/H can be set arbitrarily
Combustion time: Arbitrarily set from 0 to 99.99 S/M/H
The ignition time can be set arbitrarily from 0 to 99.99 S/M/H
Combustion lamp: Nozzle inner diameter: 9.5mm
Gas source: Gas (provided by the customer)
Flame height: 38mm
Metal comb length: 110mm, with 7 to 8 smooth round teeth within every 25mm
Steel ruler: Length 400mm, accuracy 1.0mm