Double-Arm Drop Testing Machine Is Used To Test The Damage To Product Packaging Caused By Drops And To Assess The Impact Resistance During Transportation And Handling

The drop table is used to test the damage to product packaging caused by drops and to assess the impact resistance during transportation and handling. It is mainly used to simulate the extent to which packaged items are affected by drop impacts during transportation and handling, to assess the impact resistance strength of packaged items and the rationality of packaging design. It is widely applicable to commodity inspection, enterprises, technical supervision institutions and colleges and universities. It can be used for test surface drop, corner drop, edge drop, etc.
Product features
The unique hydraulic buffer device greatly enhances the machine's service life, stability and safety.
Compliance with standards: ISO 2248-1985 Packaging - Vertical impact drop test for intact and full transport packages, GB/T 4875.5-92 Packaging - Drop test Method for Transport Packages, JIS Z0202-1994 Drop Test Method for Packaged goods
Product parameters
Drop height: 400-1500mm (customizable
The maximum weight of the specimen is 60 kilograms
The height display mode is digital
Drop mode: Electric
The reset method is manual
The sample clamping methods include rhombus, corner and surface
The base plate size is 1200*1400*10mm
The maximum size of the specimen is 800*800*1000
The external dimensions of the test bench are 1410-1250-2300mm.
Drop error ±10mm;
The error of the drop plane is less than 1°
Net weight: 300kg
The control box is a separable vertical control box, which is coated with anti-static powder and baked paint
Working power supply: 380V, 2KW
Environmental requirements for the machine workshop
Temperature: 5℃ to +28℃[1] (Average temperature within 24 hours ≤28℃)
Relative humidity: ≤85%RH
Power supply conditions: three-phase four-wire + protective ground wire
Voltage range: AC (380±38) V
The allowable frequency fluctuation range is: (50±0.5) Hz
The grounding resistance of the protective ground wire is less than 4Ω
The user is required to configure an air or power switch of corresponding capacity for the equipment at the installation site, and this switch must be independently used for this equipment