Microcontroller MCU UART 30MIPS High Performance 16-bit Digital Signal Controller Chip DSPIC30F2010-30I/SP

Price Negotiable

Price: consult with

MOQ: 10

Delivery Time: 5-8day

Brand: MICROCHIP

Product Description

Microcontroller MCU UART 30MIPS High Performance 16-bit Digital Signal Controller Chip DSPIC30F2010-30I/SP

Product Attributes

Attribute	Value
Product Category:	Digital Signal Processors & Controllers - DSP, DSC
Core:	dsPIC30F
Series:	dsPIC30F2010
Tradename:	dsPIC
Mounting Style:	Through Hole
Data Bus Width:	16 bit
Data ROM Size:	1024 B
Moisture Sensitive:	Yes

Product Description

High-Performance Modified RISC CPU:

Modified Harvard architecture
C compiler optimized instruction set architecture
83 base instructions with flexible addressing modes
24-bit wide instructions, 16-bit wide data path
12 Kbytes on-chip Flash program space
512 bytes on-chip data RAM
1 Kbyte nonvolatile data EEPROM
16 x 16-bit working register array
Up to 30 MIPs operation: DC to 40 MHz external clock input, 4 MHz-10 MHz oscillator input with PLL active (4x, 8x, 16x)
27 interrupt sources
Three external interrupt sources
8 user-selectable priority levels for each interrupt
4 processor exceptions and software traps

DSP Engine Features:

Peripheral Features:

High current sink/source I/O pins: 25 mA/25 mA
Three 16-bit timers/counters; optionally pair up 16-bit timers into 32-bit timer modules
Four 16-bit capture input functions
Two 16-bit compare/PWM output functions with Dual Compare mode available
3-wire SPI modules (supports 4 Frame modes)
I2C module supports Multi-Master/Slave mode and 7-bit/10-bit addressing
Addressable UART modules with FIFO buffers

Motor Control PWM Module Features:

Quadrature Encoder Interface Module Features:

Analog Features:

10-bit Analog-to-Digital Converter (ADC) with 1 Msps (for 10-bit A/D) conversion rate
Six input channels
Conversion available during Sleep and Idle
Programmable Brown-out Reset

Special Digital Signal Controller Features:

Enhanced Flash program memory: 10,000 erase/write cycle (min.) for industrial temperature range, 100K (typical)
Data EEPROM memory: 100,000 erase/write cycle (min.) for industrial temperature range, 1M (typical)
Self-reprogrammable under software control
Power-on Reset (POR), Power-up Timer (PWRT) and Oscillator Start-up Timer (OST)
Flexible Watchdog Timer (WDT) with on-chip low power RC oscillator for reliable operation
Fail-Safe clock monitor operation
Detects clock failure and switches to on-chip low power RC oscillator
Programmable code protection
In-Circuit Serial Programming™ (ICSP™) programming capability
Selectable Power Management modes - Sleep, Idle and Alternate Clock modes