JCC PES Hot Melt Adhesive Powder 1.20-1.23 g/cm³ Density for Heat Transfer Printing 130-140°C Application
Premium thermoplastic copolyester-based hot melt adhesive specially formulated for heat transfer printing processes. Delivers superior bonding strength, excellent heat resistance, and outstanding wash durability for textile decoration and industrial fabric applications.
| Attribute | Value |
|---|---|
| Shelf Life | 12 months |
| Color | White or yellowish |
| Application | Heat transfer printing |
| Form | Powder |
| Type | Thermoplastic |
| Press Temperature | 130-140°C |
| Parameter | Range/Typical Value |
|---|---|
| Appearance | White Powder |
| Chemical Composition | Copolyester |
| Density (g/cm³) | 1.20~1.23 |
| Melting Index (g/10min) | 25~30 (160℃, 2.16kg) |
| Melting Range DSC (℃) | 85-130 |
| Viscosity (mPa*s@210℃) | 58000~65000 |
| Washing Resistance (℃) | 40 |
Forms strong, flexible bonds with polyester (PES), polyamide (PA), and blended fabrics
Withstands repeated washing and drying cycles without delamination
Ensures smooth, even application for crisp, vibrant designs
Complies with REACH, OEKO-TEX®, and international textile safety standards
- Heat Transfer Printing
- DTF Printing
- Textile Decoration
- Garment Labeling
- Industrial Fabric Applications
- Ensure surface is clean, dry and free from solvent or grease
- Preheat substrate if necessary to prevent early condensation
- Operate at 130-140°C with 1-3 kg pressure for 10-20 seconds
- Allow complete crystallization at room temperature (25℃) for final strength
Yes, when it meets OEKO-TEX® Standard 100 or REACH SVHC compliance. Always verify certifications.
- Print design on transfer paper (with or without sublimation ink)
- Dust adhesive powder evenly over printed area
- Shake off excess powder for clean finish
- Heat press at 110-140°C for 10-20 seconds (adjust based on fabric)
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.