IEC 60076 1 Power Transformers 10 kv 0.4 kv 800kva 630kva Dry Type for Modernized Hospital Facility Supply
Price:
Negotiable
MOQ:
1
Delivery Time:
25
Brand:
HENTGPOWER
Product Description
IEC 60076-1 Power Transformers 10kV/0.4kV 800kVA/630kVA Dry Type for Modernized Hospital Facility Supply
Product Overview
Our IEC 60076-1 Standard 800kVA/630kVA Dry Type Power Transformer is a high-specification electricity distribution solution specifically engineered for the critical demands of modernized hospital facilities. Operating at 10kV to 0.4kV, this three-phase cast resin transformer ensures a stable, clean power supply for sensitive medical imaging equipment (MRI, CT scanners) and life-support systems. Built with the latest SCB13 energy-saving technology, it provides the ultimate combination of fire safety and high-efficiency performance required for healthcare infrastructure projects.
Key Selling Points
- Life-Critical Reliability: Engineered for 24/7 continuous operation, ensuring zero power interruptions for operating theaters and intensive care units.
- Total Fire Safety & Self-Extinguishing: The vacuum-cast epoxy resin insulation is flame-retardant and non-toxic, eliminating fire hazards in densely populated hospital environments.
- Ultra-Low Noise Operation: Advanced core clamping technology ensures quiet running, maintaining a peaceful recovery environment for patients.
- Exceptional Energy Efficiency: High-grade silicon steel cores minimize no-load losses, significantly reducing long-term operational costs for public health departments.
- Strong Overload Capacity: Equipped with intelligent forced-air cooling (AF), it can handle peak surgical center loads without compromising equipment lifespan.
Detailed Technical Specifications
- Model: SCB13 Series (High-Efficiency Cast Resin Dry Type)
- Compliance: Fully compliant with IEC 60076-1 and IEC 60076-11 international standards
- Voltage Ratio: Primary 10kV (High Voltage) / Secondary 0.4kV (Low Voltage)
- Insulation Class: Class F (155°C) or Class H (180°C) with high thermal endurance
- Partial Discharge: Strictly controlled under ≤10pC, ensuring an ultra-long service life of 20+ years
- Core Material: 7-step lap joint, cold-rolled grain-oriented (CRGO) silicon steel to maximize magnetic permeability
- Temperature Control: Integrated PT100 sensors with a digital controller for real-time monitoring and SCADA integration via RS485
Specialized Solutions for Regional Challenges
The Challenge: Excessive Sand & Dust Infiltration
In many African regions, fine desert sand can infiltrate windings, causing cooling blockages or insulation failure.
Our Solution
We utilize a Fully Encapsulated Vacuum Casting process. The high-gloss, anti-static surface of the resin prevents dust from adhering. Furthermore, we design "Wide Cooling Ducts" that allow sand to pass through via natural airflow, preventing accumulation and overheating.
The Challenge: Seepage Risks & Oil Contamination
Traditional oil-immersed transformers suffer from gasket degradation in extreme heat, leading to oil leaks and fire risks.
Our Solution
Our Solid-Cast Dry-Type Design is completely oil-free. By removing the liquid medium, we eliminate the risk of leaks, seepage, and soil contamination. This provides a clean, eco-friendly solution that is far safer for hospital basements and eliminates the need for expensive oil containment pits.
FAQ for African Distributors & EPC Projects
Q1: Is this transformer compatible with unstable grid voltages common in local areas?
A1: Yes. We include a ±2x2.5% off-circuit tap changer on the primary side, allowing you to adjust and maintain a stable 0.4kV output despite input fluctuations.
Q2: Does it require professional maintenance in remote regions?
A2: It is virtually maintenance-free. Because there is no oil to test or gaskets to replace, it is ideal for regions with limited technical labor. Only periodic visual checks and dust removal are recommended.
Q3: How do you support EPC contractors during the bidding process?
A3: We provide a full technical documentation package, including IEC Type Test Reports, 3D CAD drawings, and compliance certificates to strengthen your project tender.
Q4: Can it handle the high-frequency interference from medical devices?
A4: Absolutely. The SCB13 design features superior electromagnetic compatibility, protecting the transformer from harmonics generated by complex medical equipment.
Q5: What is the lead time for urgent hospital expansion projects?
A5: Our standard production cycle is 20-25 days. For critical government projects, we can expedite manufacturing to meet your delivery deadline.
Q6: What enclosure ratings do you offer for harsh environments?
A6: We provide standard IP20 for indoor use, and IP23 or higher enclosures for enhanced protection against dust and moisture.
Partner with our engineering experts to power your next healthcare project — Request a customized technical quote today!
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Hunan Hentg Power Electric Technology Co., Ltd.
Location
Room905, D6 building, CCSP Industrial Park, Yuelu District, Changsha，Hunan province, China
Contact Person
Laurel