The Battery Energy Storage System (BESS) is a fully integrated, factory-assembled energy storage solution designed for renewable energy, grid support, industrial backup, and microgrid applications.
It combines battery racks, PCS/inverter, EMS/BMS, switchgear, fire suppression, HVAC, thermal management, and communication into a single modular cabinet or 20ft/40ft container.

Engineered for long life, high safety, and stable operation, the system supports peak shaving, load shifting, frequency regulation, renewable smoothing, and emergency backup power—making it ideal for utility-scale, C&I, and grid-side energy projects.

• Battery packs + PCS + EMS/BMS + HVAC + fire protection

• Pre-tested before shipment for fast commissioning

• LFP (LiFePO4) high-safety cells

• Pack-level + rack-level + system-level protection

• Aerosol / Novec1230 / water-mist fire system

• Real-time thermal management

• Automatic fault detection & shutdown

• EMS for scheduling, optimization, peak shaving

• BMS for cell-level monitoring

• Cloud platform for remote O&M

• Supports IEC 61850, Modbus, DNP3, CAN, TCP/IP

• 6000–10000 cycles depending on configuration

• Stable performance in wide temperature conditions

• Modular 215kWh–372kWh cabinets

• Up to 1MWh / 2MWh / 3.44MWh per container

• Parallel expansion for 100MWh+ power stations

• IP54–IP65 protection

• C4/C5 anti-corrosion coating

• Suitable for desert, coastal, high humidity, and tropical regions

• Cell chemistry: LFP (LiFePO₄)

• Nominal capacity per rack: 50kWh–80kWh

• System capacity: 215kWh / 250kWh / 372kWh / 500kWh / 1MWh / 2MWh+

• Voltage: 600–1500V DC

• Cycle life: 6000+ cycles

• Rated power: 100kW–3MW

• DC/AC efficiency: up to 98.5%

• Modes: grid-tied, off-grid, black start, seamless switching

• Reactive power support

• Supports peak shaving, load shifting, frequency regulation

• Real-time monitoring of SOH/SOC

• Automatic fault detection and alarms

• Remote cloud management optional

• Aerosol / Novec1230 / Water mist

• Smoke detectors + temperature sensors

• Automatic emergency ventilation

• HVAC cooling/heating

• Intelligent temperature control

• Ambient operating temperature: -20°C to +55°C (extendable)

• Cabinet: IP54

• Container: IP54–IP65

• Anti-corrosion: C3 / C4 / C5 customizable

• IEC 62619 (Battery Safety)

• IEC 62933 (ESS Safety)

• IEC 62109 (PCS Safety)

• UL 9540A (Thermal Runaway Test)

• IEC 61850 (Communication)

Energy shifting for large solar and wind farms.

Factories, mines, data centers, EV charging stations.

Ensures 24/7 power reliability for remote areas.

Reduces electricity expenses for industrial users.

Uninterruptible power during outages and grid failures.

Improves grid stability and frequency control.

Factory-integrated, easier installation, minimal on-site work.

Plug-and-play design with pre-integrated systems.

Multi-level protection and UL9540A-compliant safety.

High-energy LFP cells optimized for long-term cycling.

Optimized PCS and smart power management software.

High heat resistance, dust-proof, salt-mist-proof.

• 215kWh/250kWh/372kWh/500kWh/1MWh+

• Cabinet / 20ft / 40ft container

• PCS power rating customization

• EMS communication protocol (IEC 61850 / Modbus / DNP3)

• HVAC systems for extreme climates

• C5 anti-corrosion for coastal environments

• Explosion-proof options

• Integration with PV inverter or EV charging

• Fully assembled cabinet or container

• Factory routine test report included

• Suitable for 40HQ / flat-rack transportation

• Optional wooden protection frame

• 15+ years experience in power equipment manufacturing

• Specialized in transformer + ESS + prefabricated cabins

• Strong engineering team for custom solutions

• IEC-compliant high-quality supply chain

• Successful projects in Africa, LATAM, Middle East, Asia

• Fast quotation & technical support