Function:

This product can effectively clean the gums and carbon deposits in injector nozzles, intake valves, piston tops and combustion chambers of gasoline engines, improve the atomization of fuel, improve combustion efficiency, effectively solve the problems of unstable speed, weak acceleration, and increase in fuel consumption, reduce the emission of hazardous gases in the exhaust gas, lubricate the parts of the fuel system, and prevent rust and corrosion. This product has no adverse effect on fuel system components and oxygen sensors.

Product Advantages:

• Efficient Cleaning Function:
  This product effectively cleans the injectors, intake valves, piston tops, and combustion chambers of gasoline engines from gum and carbon deposits to restore optimal engine performance.
• Improved combustion efficiency:
  By improving the fuel atomization condition, improving the combustion efficiency, solving the problems of unstable idling, weak acceleration and increased fuel consumption, the engine power performance is improved.
• Reduction of harmful gas emissions:
  After cleaning the fuel system, it can reduce the emission of harmful gases in the exhaust gas, meet environmental protection standards, and reduce pollutant emissions.
• Prevent system damage:
  This product lubricates fuel system components, and can effectively prevent rust and corrosion, and prolong the service life of the fuel system.
• Restore engine performance:
  After cleaning, the working condition of the engine is improved, and the common problems such as starting difficulties and lack of power are solved, so that the engine runs more smoothly.

Operation Specifications:

1. Add to Tank:
   Open the fuel tank cap and add the fuel system cleaner to the tank in the recommended ratio according to the product leaflet. As a rule, it is added in proportion to the capacity of the tank.
2. Driving for a while:
   After adding the cleaner, start the car and drive normally for about 15-30 minutes, the cleaner will gradually enter the fuel system as you go, cleaning the fuel injectors, intake valves, and other components.
3. Check after completing cleaning:
   At the end of the cleaning process, you can check the performance of the engine, such as idle stability, acceleration, fuel consumption, etc., to confirm whether it has improved.

Notices:

• Correct Addition Ratio:
  When using, cleaning agents must be added according to the capacity of the fuel tank and the ratio recommended in the product manual to avoid excessive or insufficient use.
• Avoid misuse:
  This product is only suitable for gasoline engines, not diesel engines, to ensure proper use.
• Engine Status:
  Make sure the engine is working properly and there is no serious mechanical failure or damage before use, otherwise repair it first.
• During the cleaning process, pay attention to observing:
  If there is unusual noise, smoke or power problems during cleaning, stop the vehicle immediately and check the engine.
• Storage and usage environment:
  Please store the product in a cool, dry place, away from direct sunlight and high temperature environment, to ensure product effectiveness.
• Make sure there is good ventilation:
  When using cleaning agents, make sure that the working environment is well ventilated and avoid inhaling too much vapor from the cleaning agents.