Cool Engine Anti Freeze Boil Rust Corrosion Scale For Car Coolant

Description:

This advanced engine coolant is a meticulously engineered blend of deionized water and ethylene glycol, specially developed for modern liquid-cooled engines. The sophisticated formulation provides outstanding thermal management capabilities while ensuring reliable freeze protection and reduced fluid loss through evaporation.

Product Specs:

Technical Advantages:

• Dual-Temperature Protection:
• Freeze protection down to -37°C (-35°F)
• Boil-over protection up to 129°C (265°F)
• 5-in-1 Protection: Anti-freeze, Anti-boil, Anti-rust, Anti-corrosion, Anti-scale
• 30% lower evaporation rate vs. conventional coolants
• Meets ASTM D3306 and JIS K2234 standards
• Compatible with all metals (including aluminum)

Usage:

• Cool engine to <50°C (122°F)
• Drain existing coolant: Open radiator drain valve, Remove block drain plugs (if equipped)
• Use radiator flush solution (circulate 15-20 mins)
• Purge with deionized water (until clear discharge)
• Fill through radiator neck (50/50 mix with DI water recommended)
• Bleed air pockets: Run heater at max temperature, Rev engine to 2500 RPM for 30-second intervals
• Check concentration annually with refractometer

Safety Information:

• Contains denatonium benzoate (bittering agent)
• Toxic to aquatic life (LD50: 4700 mg/kg)
• Ingestion: Immediate medical attention required
• Eye contact: 15-minute flush (ANSI Z358.1)
• Disposal: Collect used coolant separately, Recycle through certified processor

Vehicle Compatibility:

• Gasoline/Diesel engines
• Hybrid/Electric vehicle battery coolants
• Heavy-duty commercial vehicles