APPLICATION:

1.Industrial Uses:

• Factory equipment, machinery, and metal structures

• Storage tanks, pipelines, and industrial containers

• Production tools and auxiliary equipment

2.Household & Decorative Applications:

• Furniture renovation, indoor and outdoor décor

• Home appliances, fixtures, and hardware

• Gardening tools, patio sets, and fencing

3.Automotive & Mechanical Repairs:

• Vehicle touch-ups (cars, motorcycles, bicycles)

• Engine parts, brake calipers, and exhaust components

• Agricultural machinery and workshop tools

4.DIY & Craft Projects:

• Model making, hobby crafts, and custom artwork

• Upcycling projects such as vintage items and decorative pieces

• Small functional items like mailboxes, lamps, and shelving

DIRECTIONS FOR USE:

1. Surface Preparation: Clean and dry the surface. Smooth surfaces can be lightly sanded with fine sandpaper.
2. Mask and Shake: Mask off any areas not to be sprayed and shake the spray can for at least one minute before use.
3. Test Spray: First test spray on scrap paper. Maintain a distance of 20-30 cm when applying the final spray. Apply thin, even layers at a steady speed, leaving 2-3 minutes between each coat. For a total of 2-3 coats, this will be sufficient.
4. Complete Drying: After spraying, allow to dry for approximately 30 minutes. Allow to fully cure after 24 hours.

WARNINGS:

• Maintain adequate ventilation and avoid open flames!

• Use outdoors or in a well-ventilated area, away from flames, heat sources, and electrical appliances.
• Wear a mask, gloves, and goggles during application.
• Store in a cool, dark place, out of reach of children.