Applicable Materials: Automotive clear coat paint, painted surfaces

Ideal For

• Routine vehicle washes

• Removing road grime, grease, and oil films

• Preventing water spots and mineral deposits

• Protecting paint from acid rain and environmental contaminants

How to Use:

1. Pre-Rinse the Vehicle
   Thoroughly rinse the vehicle with clean water to remove loose dirt and debris prior to application.

2. Dilution (If Concentrate)
   Dilute the shampoo according to the recommended ratio if using a concentrated formulation. Ready-to-use variants can be applied directly.

3. Apply Shampoo Evenly
   Using a foam gun, wash mitt, or sponge, evenly distribute the product across all painted surfaces.

4. Emulsify Contaminants
   Allow the foam to penetrate and emulsify dirt, grease, oil films, and other contaminants for optimal cleaning efficiency.

5. Gentle Agitation
   Use soft, non-abrasive tools (microfiber mitt or sponge) to gently lift stubborn particles without scratching the paint.

6. Thorough Rinse
   Rinse the vehicle thoroughly with clean water to remove all shampoo and loosened debris.

7. Drying
   Wipe the surface with a clean microfiber towel or allow to air-dry to achieve a streak-free, high-gloss finish.

Cautions:

• Do not apply to interior surfaces or non-automotive materials.

• Avoid direct sunlight and hot surfaces. Apply to cool paint surfaces to prevent streaks or premature drying.

• Avoid contact with the eyes and prolonged skin exposure. If contact occurs, thoroughly rinse with water.

• Use Appropriate Tools: Avoid using abrasive brushes and instead use microfiber mitts, sponges, or foam guns.

• Keep out of reach of children and pets. Store in a secure location.

• Proper Storage - Keep in a cool, dry area away from heat and direct sunshine.

• Do not consume - If you accidentally consume something, get medical attention right away.