Bossde Automotive Black Paint Efficient High Gloss Coating 2K System 4L Car Body Refinish
M-208 Blue Phase Special Black is developed for automotive refinishing professionals who require a stable spraying process and consistent finish across repaired panels. This two component acrylic topcoat delivers a controlled curing reaction that supports film strength and surface smoothness.
It is suitable for use in repair centers handling high-frequency repainting work, where coating efficiency and predictable results are important. The formulation supports uniform atomization during spraying, helping operators achieve even coverage.
Smooth Spray Performance
Designed for stable atomization, helping reduce uneven coating during application.
Consistent Gloss Effect
Maintains a balanced gloss level after curing, suitable for visible exterior panels.
Controlled Drying Behavior
Drying process is stable under standard workshop conditions, allowing better workflow planning.
Adapted for Panel Repair
Works effectively on partial repair areas without significant color variation.
Compatible with Common Systems
Can be integrated into standard automotive refinishing processes with primers and clear coats.
- Passenger vehicle panel refinishing
- Automotive repair shop repainting workflows
- Spot repair and blending areas
- Exterior body panel finishing
- Automotive service centers and paint booths
| Item | Specification |
|---|---|
| Product Name | 2K Blue Phase Special Black |
| Model | M 208 |
| Product Type | 2K Acrylic Topcoat |
| Mixing Ratio | 2:1 |
| Application | Spray |
| Flash Off Time | 10–15 minutes between coats |
| Surface Dry | Approx. 30 minutes |
| Full Cure | 24 hours |
| Color | Black |
| Size | 4L |
| Material | Acrylic resin system |
Q1: Can this product be used for spot repair?
Yes, it is suitable for localized repair and blending applications.
Q2: Does it require baking for curing?
Air drying is sufficient, but baking can accelerate curing if needed.
Q3: Is the gloss level adjustable?
Gloss mainly depends on application method and clear coat usage.
Q4: What environment is suitable for spraying?
A clean spray booth with controlled temperature is recommended.
Q5: Can it be layered with other coatings?
Yes, it can be used within a full coating system including primer and clear coat.
Maintain proper spray gun setup to ensure even atomization. Apply multiple thin coats and allow flash-off time between layers. Avoid excessive film thickness in one pass to reduce the risk of surface defects.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.