ZUOTONG Z9001R Grey Automotive Plastic Primer 1K CPP Modified Acrylic for PP ABS Trim Refinishing No Hardener Required
MOQ:
50
Delivery Time:
7-14 working days
Brand:
ZUOTONG
Product Description
Specify the preparation job before selecting the primer
Some plastic repairs need an adhesion-promoting layer on an otherwise suitable surface. Others also leave fine preparation marks that must be addressed before colour application. ZUOTONG Z9001R is positioned for the second requirement: a grey plastic primer combining adhesion promotion and light filling.
The formulation uses CPP-modified acrylic resin and forms a thermoplastic film. It is a 1K product, prepared with the specified compatible thinner rather than a hardener. Correctly treated PP and ABS are the substrates identified in the source.
For trade buyers, that creates a defined product position: local automotive plastic preparation where a visible grey layer and minor-defect filling are useful. It does not establish universal plastic compatibility or high-build repair capability.
CTA: Request a Z9001R Product and Supply Specification
Choose between preparation routes
| Surface requirement | Selection direction | Confirmation needed |
| PP or ABS with minor sanding marks | Evaluate Z9001R for adhesion promotion plus light filling | Exact preparation and overcoating process |
| PP where a transparent primer is being considered | Review the named ZF600 transparent PP primer | Its full substrate scope, function and application instructions |
| Deep scratches, cracks or shape loss | Specify the appropriate damage-repair process first | Repair material and subsequent coating compatibility |
| Unidentified plastic or an uncertain existing coating | Resolve identification before primer selection | Suitability of the complete system |
The source provides a role distinction between Z9001R and transparent PP primers, not comparative laboratory data. Do not advertise superior adhesion, longer life or faster drying than ZF600 without evidence.
Why this model belongs in a defined product assortment
A clear function for technical sales
Z9001R combines two stated needs in one primer: plastic adhesion promotion and light filling of minor preparation defects. Sales teams can describe the intended repair condition instead of using a vague “universal primer” claim.
A grey layer that can be inspected
The visible primer colour helps technicians assess their preparation. The source describes a fine, smooth film intended to provide an even foundation for subsequent colour application.
A single-component preparation process
No hardener is needed. Thinner selection and the reduction ratio remain part of the technical specification, so they should accompany any trial or supply proposal.
A product aimed at local repair work
Fast drying is part of its stated positioning for automotive plastic refinishing. Publish numerical sanding and overcoating times only after obtaining the relevant conditions from the current TDS.
Representative uses across the supply chain
An automotive refinish distributor expanding its plastic-preparation range. Position Z9001R beside clearly differentiated preparation products. Give customers a substrate and repair-condition checklist so they can distinguish light filling from adhesion-only treatment and damage repair.
A multi-site collision repair business standardising material selection. Use the same model identity and verified instructions across locations, while recording actual application conditions at each shop. Do not treat the absence of a hardener as permission to ignore drying or thinner selection.
A vehicle-parts refinishing operation handling PP and ABS items. Assess the primer on representative parts using the complete proposed process. The source's automotive-parts application direction does not by itself establish approval for an OEM production line or a vehicle manufacturer's specification.
These examples describe plausible applications; they are not customer endorsements or completed projects.
Understand the material you are qualifying
Z9001R is a grey, single-component thermoplastic plastic primer based on a chlorinated polypropylene-modified acrylic resin system. The formulation is described as promoting adhesion to correctly prepared PP and ABS while filling slight surface defects.
Its place in the coating sequence is after the appropriate surface preparation and before the approved colour-coat stages. The primer, thinner and subsequent coating must be assessed as a combination. No hardener component is specified for Z9001R.
Detailed composition, solvent content and chemical identifiers should be obtained from the SDS. The resin description alone does not establish VOC content, transport classification or a complete customs declaration.
Buyer specification table
| Specification | Available detail |
| Brand and model | ZUOTONG Z9001R |
| Commercial description | 1K grey filling plastic primer |
| Chemistry identified | Chlorinated polypropylene (CPP)-modified acrylic resin |
| Film character | Thermoplastic |
| Component count | One |
| Colour | Grey |
| Required preparation material | Specified compatible thinner |
| Hardener requirement | None |
| Substrates named | Properly prepared PP and ABS automotive plastic parts |
| Functional scope | Adhesion promotion with light filling of minor surface imperfections |
| Application positioning | Local plastic repair and automotive part refinishing |
| Drying description | Fast drying; reference times and conditions require current TDS |
| Appearance | Fine, smooth preparatory film |
| HS code | 3208201090 |
| Packaging sizes | Request the current supply specification |
| Reduction, gun setup and film build | Values must be obtained before a production trial |
| Storage, shelf life and shipment details | Supplier documentation required |
Turn a sample into a useful qualification trial
Define the test before mixing
Record the plastic identity, surface condition, cleaning method and planned coating sequence. Specify what you need to establish: suitability for the substrate, the treatment of fine preparation marks and the final appearance after the full process.
Use the approved application procedure
Stir the primer thoroughly and add only the recommended thinner at the specified ratio. Follow the technical guidance for sanding, gun adjustment, thin application, flash-off and drying. Do not borrow settings or ratios from another 1K product.
Assess the completed system
Check the prepared surface before colour application, then evaluate the complete refinish result under the agreed inspection procedure. If an adhesion test is required, agree its method and acceptance criteria with the supplier; do not invent a test rating from the product description.
Keep the result traceable
Retain the model and batch identity, document version, thinner choice, application conditions and observations. This gives repeat orders a more useful reference than an unsupported “fast dry” or “high adhesion” headline.
Packaging information to confirm with the quotation
The available extracted text does not establish container size or export packing details. Ask for the current net content, container format, units per carton, outer dimensions and gross weight.
Specify whether the quotation covers primer only or also the recommended thinner. Confirm storage requirements, shelf life and product-specific transport information before shipment planning. Litres, kilograms and shipping weights must be supplied separately rather than treated as interchangeable figures.
Wholesale projects and custom-brand enquiries
For a distributor or workshop-network order, provide destination, volume forecast, packaging preference and the intended customer applications. Request the confirmed product specification, current commercial terms and technical documents with the offer.
Private-label buyers can submit an OEM brief covering brand ownership, target market, language, artwork and expected quantities. OEM production, packaging customisation, MOQ and lead time are not confirmed in the available source for this model; obtain written agreement on what can be supplied.
Avoid carrying over another product's OEM capability or pack format to Z9001R without confirmation.
Related products and documents
| Item | Purpose in the buying decision |
| ZF600 transparent PP primer | Review an alternative preparation role, using its own technical data |
| Approved thinner for Z9001R | Establish the exact preparation ratio and selection conditions |
| Compatible colour and finishing system | Confirm overcoating suitability and sequence |
| Current Z9001R TDS and SDS | Support application, handling and specification decisions |
| Suitable plastic preparation materials | Complete the substrate-specific process |
This list identifies selection needs. It is not a verified bundle or an instruction to mix or layer all listed products together.
Procurement FAQ
How should Z9001R be positioned in a distributor catalogue?
Describe it as a 1K grey plastic primer combining adhesion promotion with light filling for correctly prepared PP and ABS. Avoid calling it a universal or high-build primer.
What is the stated resin technology?
The source identifies a CPP-modified acrylic resin system. Request the SDS for detailed composition rather than treating the resin name as a full formulation disclosure.
Is there a verified comparison with ZF600?
The source identifies ZF600 as a transparent PP primer and distinguishes the product roles. It does not provide verified comparative adhesion or drying results in the extracted content.
Can the same listing promise suitability for every plastic part?
No. PP and ABS are the named substrates, subject to correct preparation. Other plastics and existing coating systems need separate confirmation.
What should accompany a sample request?
Provide the intended substrates, surface condition, colour system and application conditions. Request the current TDS, SDS and recommended thinner details.
Are packaging sizes and minimum quantities fixed here?
No verified values were available in the extracted source. Obtain pack sizes, carton information and MOQ in the current quotation.
Is OEM branding confirmed for this model?
Not from the available information. Submit your requirements and obtain confirmation before presenting private-label availability to customers.
Can it be advertised as an OEM-approved production primer?
No vehicle-manufacturer approval or production-line qualification is established here. Any such claim requires applicable, verifiable documentation.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Guangzhou Gate Materials Co., Ltd.
Location
Room 1503, Building 4, Yiyun Science and Innovation Park, No. 13, Jinshi Third Road, Dayuan Subdistrict, Baiyun District, Guangzhou, Guangdong, China
Contact Person
Natalia Zhu