1-10 Micron PP Pleated Filter Cartridge 68mm OD for Soft Drink Filtration - 5-40 Inch Length Options
Advanced microporous pleated filter element manufactured using hot melt welding technology without adhesives, ensuring zero leakage and no secondary pollution. Constructed with ultra-fine polypropylene fiber membrane supported by non-woven fabric or wire mesh.
- Excellent chemical compatibility for filtering strong acids, alkalis, and organic solvents
- Deep filtration with large membrane surface area for enhanced performance
- Low differential pressure with high dirt holding capacity and extended service life
- Progressive aperture change technology for superior contaminant retention
| Parameter | Specification |
|---|---|
| Outer Diameter | 68mm |
| Inner Diameter | 30-32mm |
| Available Lengths | 5", 10", 20", 30", 40" |
| Filtration Accuracy | 0.1μm, 0.22μm, 0.45μm, 1μm, 3μm, 5μm, 10μm, 20μm, 50μm |
| Max Differential Pressure | 75psi (5.1 bar) at 25°C |
| Recommended Change Out | 1.5-2.0 bar |
| Maximum Temperature | 80°C |
| Sterilization Cycles | 5 times, 20 minutes cycles @121°C |
| Component | Material |
|---|---|
| Filter Membrane | Polypropylene (PP) |
| Support/Diversion Layer | PP |
| Shell/Center Skeleton/Port | PP, Stainless Steel |
| Sealing Ring Options | Silicone Rubber, Ethylene Propylene Rubber, Nitrile Rubber, Fluorine Rubber, Teflon, FEP Wrapped Viton |
Shandong Qingqingquan Environmental Technology Co., Ltd. is a high-tech environmental protection enterprise specializing in water treatment solutions. The company operates a 3000 square meter facility and maintains ISO 9001 quality management system certification with CE certification. With 10 years of experience in water treatment, they provide comprehensive technical support and after-sales service.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.