Anti Corrosion Structural Irregular Beam Versatile Shaped Steel Fabrication Part
The Anti Corrosion Structural Irregular Beam is a versatile shaped steel fabrication part produced for projects that cannot be solved with standard sections. Custom roll-formed or press-bent into irregular profiles, this beam fits complex connection points, transitions and non-standard load paths common in solar racking and industrial steelwork.
Made from Q235B and Q355B carbon steel and finished with hot-dip galvanizing, the irregular beam resists corrosion while providing the stiffness and strength required by structural applications. Because the profile can be tailored in height, thickness and hole pattern, designers gain freedom to match existing geometry, reduce part counts and simplify assembly across mixed structural systems.
- Custom Irregular Profile: The section is shaped to match complex drawings, letting designers resolve awkward connections without multiple welded plates.
- Anti Corrosion Coating: Hot-dip galvanizing protects the shaped steel against rust, moisture and pollutants for reliable outdoor performance.
- Versatile Structural Part: Serves as a transition, brace or mounting member across solar, agricultural and industrial steel structures.
- High Stiffness to Weight: Optimized wall thickness delivers rigidity and load capacity while keeping the beam light and economical.
- Precision Fabrication: Cutting, punching and bending are performed to tight tolerance so parts drop into place on site with minimal fitting.
- Flexible Customization: Height, thickness, length and finish can all be adapted to the specific structural fabrication requirement.
| Parameter | Specification |
|---|---|
| Material Grade | Q235B / Q355B carbon steel |
| Surface Treatment | Hot dip galvanized |
| Section Type | Custom irregular shaped steel |
| Section Height | 60 mm to 200 mm |
| Wall Thickness | 2.0 mm / 3.0 mm / 4.0 mm |
| Length | Up to 6000 mm, customized |
| Fabrication | Cutting, punching, bending |
| Service Life | 20 years structural warranty |
The anti corrosion irregular beam is used as a transition member in solar racking, a brace in carports and a shaped mounting part in industrial steel frames and agricultural equipment. It also suits prefabricated structures and general fabrication jobs where a standard C or Z section will not follow the required geometry. Engineers value the shaped steel for reducing welded assembly and improving fit-up on complex projects.
Shaped beams are stacked on steel pallets, wrapped in protective film and strapped with export-grade banding so the custom profiles arrive free of dents and rust. Every lot is inspected for dimensions, hole position, bend angle and coating thickness under ISO 9001:2015 procedures. Drawings-based first-article reports can be provided to confirm the fabrication matches the approved structural part.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.