Y83/T-63 Hydraulic Metal Baler 63-Ton Press Force 200×200 mm Bale for Light Metal Scrap Recycling
The Y83/T-63 Hydraulic Metal Baler is a compact hydraulic press designed for light metal scrap recycling and workshop-level scrap volume reduction.
With a 630 kN (63-ton) nominal pressing force and a standard 200×200 mm bale section, this machine efficiently compresses loose metal scrap into dense, stackable bales, improving storage efficiency and material handling.
This model adopts a horizontal push-out bale discharge structure, ensuring simple mechanical design, stable operation, and low maintenance cost.
Thanks to its compact chamber size and low installed power, the Y83/T-63 is especially suitable for facilities that require reliable metal baling without high energy consumption or complex automation systems.
| No. | Model | Nominal Force | Bale section | Power | Operation | |||
|---|---|---|---|---|---|---|---|---|
| Y83/T-63 | 630kN/63t | 1000*600*500mm | 200*200mm | 7.5kW | Manual Valve Control |
- Compact Structure for Limited Space
The optimized frame layout and compact chamber design allow installation in workshops or recycling areas with restricted floor space. - Efficient Compression for Light Scrap
A 63-ton hydraulic force provides sufficient pressure to compact light steel scrap, aluminum offcuts, and mixed sheet metal waste into dense bales. - Stable Push-Out Discharge System
The horizontal push-out mechanism ensures controlled bale unloading with minimal mechanical complexity and reduced failure points. - Low Power Consumption
Equipped with a 7.5 kW motor, the machine delivers stable performance while keeping electricity consumption at a low level. - Simple Manual Control
Manual valve operation provides intuitive control, easy operator training, and straightforward maintenance.
-
Q1: What type of scrap is this model best suited for?
This baler is designed for light to medium-density metal scrap such as steel offcuts, aluminum scrap, copper scrap, and sheet metal waste.
Q2: Is the Y83/T-63 suitable for continuous daily operation?Yes. The reinforced structure and stable hydraulic system allow continuous operation within its designed capacity.
Q3: How does the push-out bale discharge work?After compression, the bale is pushed out horizontally by a hydraulic cylinder, allowing smooth and controlled unloading.
Q4: Is automation available on this model?The standard configuration uses manual valve control. Semi-automatic or PLC-assisted options may be available upon request.
Q5: Can the chamber or bale size be customized?The standard bale section is 200×200 mm. Chamber and bale dimensions can be customized depending on material type and production requirements.
-
The Y83/T-63 Hydraulic Metal Baler is suitable for processing:
-
Light steel scrap and sheet metal offcuts
-
Aluminum scrap and profiles
-
Copper and non-ferrous metal residues
-
Small fabrication waste from workshops and factories
It is commonly used in metal workshops, fabrication plants, and small to medium recycling facilities.
Quality & Service-
Manufactured under strict internal quality control procedures
-
One-year warranty for the complete machine
-
Long-term technical support and spare parts supply
-
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.