Q43L-4000 Hydraulic Gantry Shear with 6000 × 1400 × 700 mm Press Box and 1400 mm Blade for Bulky Mixed Scrap Processing
The Q43L-4000 gantry shear is engineered for bulky and mixed scrap processing, where large-volume materials, irregular shapes, and high cross-sections must be handled efficiently before downstream processing.
With a 4000 kN shearing force, an extended 1400 mm blade, and an oversized 6000 × 1400 × 700 mm press box, this model is designed to process large, heavy, and mixed scrap streams that exceed the handling capability of medium-duty gantry shears.
The controlled cutting frequency of 3–4 times per minute ensures stable operation under heavy loads, making it suitable for large recycling plants and steel mills handling complex scrap input.
| Model | Shearing Force (KN) | Blade Length (mm) | Press box size (mm) | Cutting Frequency (times/min) | Power (kW) |
|---|---|---|---|---|---|
| Q43L-4000 | 4000 | 1400 | 6000*1400*700 | 3-4 | 45*2 |
- 6000 mm Long Press Box for Large and Irregular Scrap
The 6000 mm press box length allows efficient loading of bulky and oversized scrap without excessive pre-cutting, improving handling efficiency for mixed scrap streams.
- 1400 mm Blade for Large Cross-Section Materials
The extended blade length supports cutting of thick bundles, profiles, and mixed assemblies, ensuring consistent shearing across wide material sections.
- 4000 kN Shearing Force for Heavy Scrap Resistance
A nominal shearing force of 4000 kN provides sufficient cutting capacity for dense and compacted scrap, reducing incomplete cuts and secondary handling.
- Controlled Cutting Frequency for Structural Stability
Operating at 3–4 cuts per minute, the machine prioritizes:
- Reduced frame stress
- Stable hydraulic performance
- Long service life under heavy-duty conditions
This makes it ideal for continuous heavy-load processing, rather than short-cycle high-speed cutting.
- Bulky mixed steel scrap
- Thick structural steel offcuts
- Bundled rebar and profiles
- Large industrial scrap components
- Irregular steel assemblies
This model is not intended for light scrap or thin sheet metal, but for high-resistance, high-volume mixed scrap.
The Q43L-4000 gantry shear is commonly used as:
- Core cutting equipment in bulky scrap preparation zones
- Front-end processing unit before shredders or furnaces
- Fixed gantry shear in large-scale recycling yards
- Heavy-duty pre-processing equipment in steel mill scrap yards
Its large press box and high shearing force make it especially suitable where scrap size variability is high.
The Q43L-4000 offers a larger press box, longer blade, and higher shearing force, making it more suitable for bulky and mixed scrap, rather than controlled continuous preparation.
Yes. It is designed for high-resistance scrap handling commonly found in steel mill environments.
Yes. The oversized press box and high cutting force are optimized for irregular and mixed scrap inputs.
No. The focus is on stable, heavy-duty cutting, not high cutting frequency.
The Q43L-4000 gantry shear is supplied with a 12-month warranty from the date of commissioning, covering major mechanical, hydraulic, and control components under normal industrial use.
- Lifetime technical support
- Remote diagnostics and troubleshooting
- Long-term spare parts availability
- Engineering support for system integration
If your operation processes large, heavy, or irregular scrap, and requires high cutting force with stable operation, our engineering team can help you evaluate whether the Q43L-4000 is the right solution.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.