Q43L-8000 Extreme-Duty Gantry Scrap Shear with 8000 kN Cutting Force, 2000 mm Blade and 8000 × 1950 × 900 mm Loading Room for Furnace Charging Preparation
The Q43L-8000 gantry scrap shear is engineered for extreme-duty scrap charging preparation, where maximum cutting force, oversized material intake, and absolute structural stability are required prior to furnace charging or heavy downstream processing.
With an 8000 kN cutting force, a massive 2000 mm blade, and an extra-large 8000 * 1950 * 900 mm loading room, this model is designed to process ultra-heavy, high-density, and large-section steel scrap commonly found in integrated steel mills and industrial scrap hubs.
The low cutting frequency of 2–3 cuts per minute reflects a design focus on controlled energy release, frame longevity, and hydraulic system stability under extreme loads.
| Item | Specification |
|---|---|
| Model | Q43L-8000 Gantry Scrap Shear |
| Cutting Force (kN) | 8000 |
| Loading Room Size (mm) | 8000*1950*900 |
| Blade Length (mm) | 2000 |
| Oil Cooling System | Air cooling system |
| Hydraulic System Pressure | 25 MPa |
| Cutting Speed (times/minute) | 2–3 |
| Power (kW) | 270 |
| Operation | PLC automatic control |
| Weight (kg) | 92,000 |
The extreme cutting force enables direct processing of ultra-dense, thick, and compacted scrap, minimizing the need for secondary cutting before furnace charging.
The long blade supports stable shearing of large cross-section bundles, thick profiles, and wide scrap assemblies, ensuring uniform size reduction for charging efficiency.
The 8000 mm long loading room allows crane feeding of large, untrimmed scrap pieces, reducing pre-handling time and increasing yard throughput.
Operating at 2–3 cuts per minute, the Q43L-8000 prioritizes:
- Reduced peak stress on the gantry frame
- Stable hydraulic pressure control
- Long-term reliability in steel mill duty
This is a deliberate design choice for extreme-load industrial environments, not high-speed processing.
- Ultra-heavy bundled steel scrap
- Thick structural steel and large profiles
- Furnace-grade scrap assemblies
- High-density industrial production scrap
- Oversized mixed steel components
This model is not intended for light scrap, thin sheet metal, or high-speed yard operations, but for maximum-force, furnace-oriented preparation.
The Q43L-8000 is typically installed as:
- Final cutting stage before furnace charging
- Extreme-duty gantry shear in steel mill scrap yards
- Core preparation equipment for integrated steel plants
- Heavy pre-processing station before downstream handling systems
Its size, weight, and cutting force make it suitable only where foundation strength, power supply, and material volume meet industrial-scale requirements.
The Q43L-8000 provides higher cutting force, a longer blade, and a significantly larger loading room, making it suitable for furnace charging preparation, not just industrial-scale cutting.
Yes. It is designed for long-term, low-frequency, extreme-load operation in steel mill environments.
Lower speed ensures controlled energy release and structural protection under extreme cutting force, extending machine lifespan.
Crane feeding is recommended due to scrap size and weight, though integration with heavy conveyors is possible in custom layouts.
The Q43L-8000 gantry shear is supplied with a 12-month industrial warranty from commissioning, covering structural, hydraulic, and control components under normal extreme-duty operation.
- Lifetime technical support
- Remote commissioning and diagnostics
- Long-term spare parts availability
- Engineering assistance for foundation, layout, and system integration
If your operation requires maximum cutting force, direct processing of oversized scrap, and reliable preparation before furnace charging, the Q43L-8000 is designed for this role.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.