Y83-315 Ton Scrap Metal Briquetting Press with 3150kN Nominal Pressure, Ø120×180mm High-Density Briquettes, 278MPa Forming Pressure for Steel Plant Pre-Treatment Lines

The Y83-315 Scrap Metal Briquetting Press is a 315-ton class hydraulic briquetting machine designed for steel mills, large scrap recycling centers, and semi-continuous production lines.

With a 3150 kN nominal pressing force and 278 MPa effective pressure on the briquette, the machine compresses loose metal chips into high-density cylindrical briquettes, significantly improving material handling efficiency, furnace charging stability, and metal recovery rate.

It is commonly installed in:

• Steel plant scrap pre-treatment sections
• Cast iron chip recycling lines
• Machining waste recovery systems
• Furnace feeding preparation areas

The 315-ton hydraulic system ensures:

• Stable compression of cast iron chips
• Reduced rebound after demolding
• Consistent briquette density suitable for furnace feeding

Actual pressure acting on the material reaches 278 MPa, enabling:

• Strong internal bonding of metal chips
• Lower oxidation loss during melting
• Higher scrap utilization rate in steelmaking

This briquette dimension is widely accepted by steel plants because it:

• Fits standard furnace charging systems
• Maintains good permeability during melting
• Balances density and melting speed

Note: The above parameters are for standard configuration. Customization is available based on customer requirements. Production capacity may vary depending on material type and form.

The Y83-315 briquetting press is engineered for:

• Cast iron chips
• Steel machining swarf
• Metal sawdust
• Short turning scraps

Its pressure-to-briquette ratio makes it especially suitable for high-density iron-based materials, where lower-tonnage machines often fail to achieve sufficient compaction.

Installing a 315-ton briquetting press in a steel plant pre-treatment line delivers:

• Reduced scrap storage volume
• Cleaner and safer material handling
• More stable furnace charging
• Lower melting loss compared to loose chips
• Improved logistics efficiency between workshop and furnace

This makes the machine a functional bridge between machining waste and steelmaking input.

The machine adopts a PLC-based control system offering:

• Stable cycle control
• Consistent briquette dimensions
• Reduced operator dependency
• Easy integration into existing recycling or production lines

The Y83-315 can be customized based on:

• Material characteristics
• Target briquette density
• Required output rate
• Integration with conveyors, crushers, or shredders

This flexibility makes it suitable for both standalone operation and production-line deployment.

• Warranty Period: 1 year for the complete machine
• All critical hydraulic and structural components are tested before delivery
• Machines are manufactured under strict quality control standards
• Long-term spare parts support available

If you are planning to upgrade your scrap pre-treatment system or integrate a 315-ton briquetting press into your steel plant or recycling line, feel free to contact us for:

• Technical consultation
• Line configuration suggestions
• Customized quotations
• Project feasibility analysis

We help you turn loose metal waste into high-value furnace feed.