Y83/T-63 63 Ton Hydraulic Metal Baler with 200×200mm Bale Section and Manual Valve Control for Scrap Yards
The Y83/T-63 hydraulic scrap metal baler is a 63-ton class compacting machine designed for small to medium scrap yards, metal recycling workshops, and localized scrap collection centers.
With a 630 kN nominal force and a compact bale section of 200 × 200 mm, this model provides efficient compaction of light to medium scrap materials while maintaining low energy consumption and simple manual operation.
It is particularly suitable for facilities that require stable compaction without the complexity of automated PLC systems.
The 63-ton hydraulic force provides sufficient compression for:
- Light steel scrap
- Thin sheet metal
- Small structural offcuts
- Recyclable industrial metal waste
It balances compaction strength and energy efficiency.
The bale section size is optimized for:
- Easy handling and stacking
- Transportation efficiency
- Suitable loading for small melting furnaces
The compact output size reduces storage space and improves scrap logistics.
The moderate chamber dimensions allow:
- Manual or small crane feeding
- Efficient handling of light scrap
- Controlled batch compaction cycles
This size makes the machine ideal for facilities with limited floor space.
The low power requirement ensures:
- Reduced operating cost
- Energy-efficient operation
- Compatibility with standard industrial power supply
This makes it suitable for smaller recycling operations.
The machine uses a manual valve control system, offering:
- Simple operation
- Lower maintenance complexity
- High reliability in basic scrap yard environments
It is ideal for operations prioritizing durability over automation.
| Parameter | Value |
|---|---|
| Model | Y83/T-63 |
| Nominal Force | 630 kN / 63 ton |
| Press Chamber Size | 1000 × 600 × 500 mm |
| Bale Section | 200 × 200 mm |
| Power | 7.5 kW |
| Operation | Manual Valve Control |
| Application Type | Light to Medium Scrap Compaction |
The Y83/T-63 is suitable for:
- Light steel scrap
- Thin sheet metal
- Aluminum scrap
- Small metal profiles
- Industrial offcuts
It is not designed for heavy structural steel or high-density bundled scrap.
The 63-ton scrap baler helps reduce scrap volume, improve storage efficiency, lower transportation costs, and create standardized bale shapes suitable for resale or furnace feeding.
Its compact design makes it a practical solution for growing scrap businesses entering mechanized compaction.
While supplied with manual valve control as standard, this model can be upgraded to semi-automatic operation upon request.
This machine is commonly installed in:
- Small and medium scrap yards
- Metal recycling stations
- Fabrication workshops
- Local scrap collection points
- Entry-level metal recycling businesses
Is this machine suitable for heavy scrap?
No. It is designed for light to medium scrap materials.
Can this model be upgraded to PLC control?
Yes, semi-automatic configurations are available upon request.
What is the advantage of manual valve control?
Lower cost, simpler maintenance, and higher reliability in basic industrial environments.
Is 7.5 kW sufficient for industrial use?
Yes, for light scrap compaction this power rating ensures stable and energy-efficient operation.
The Y83/T-63 is supplied with a one-year warranty covering hydraulic and structural components under normal use.
Technical support, spare parts supply, and installation guidance are available to ensure reliable operation.
If you operate a small or medium scrap yard and need an efficient, cost-controlled hydraulic baler, the Y83/T-63 provides reliable compaction with simple operation.
Contact us for technical consultation, layout recommendations, and project quotation.
Tell us your scrap type and daily volume, and we will help confirm the most suitable baler configuration.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.