GE Fanuc IS215UCVDH5A Mark VI SPEEDTRONIC PLC Controller with 256 MB DDR ECC RAM and -40°C to +70°C Operating Range
Price:
$10-3000
MOQ:
1 piece
Delivery Time:
3-5 work days
Brand:
General Electric
Product Description
GE Fanuc IS215UCVDH5A Controller - A factory-tested VME-based controller from GE's Mark VI SPEEDTRONIC™ family, engineered for precise gas- and steam-turbine control, protection, and sequencing. Drop-in replacement for legacy IS215UCV* cards—guaranteed 100% authentic, firmware unaltered, ready for immediate field deployment.
Key Features & Benefits
OEM Genuine GE Fanuc part - serialized & sealed ESD bag
VME64x-compliant 6U single-slot card
64-bit RISC processor with 256 MB DDR ECC RAM
Dual 10/100 Ethernet ports for HMI & ToolboxST™ connectivity
512 MB on-board flash for application & historical data logging
Redundant power feeds (5V / 3.3V) with hot-swap support
Wide operating temperature range: -40°C to +70°C (conformal coated)
SIL 2 capable per IEC 61508 for safety-critical loops
Compatible with Mark VI Simplex & TMR (Triple Modular Redundant) racks
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | IS215UCVDH5A |
| Series | Mark VI SPEEDTRONIC |
| Form Factor | 6U VME64x, single-slot |
| Processor | 64-bit PowerPC @ 333 MHz |
| Memory | 256 MB DDR ECC, 512 MB Flash |
| Communication | 2× 10/100 Base-TX (RJ-45), 1× RS-232 (DIAG), VME P1/P2 |
| I/O Scan Rate | < 5 ms (typical) |
| Power | +5V @ 6A, +3.3V @ 3A |
| Operating Temperature | -40°C to +70°C |
| Humidity | 5% to 95% RH non-condensing |
| Shock/Vibration | 15g / 2g per IEC 60068-2-27/-64 |
| Approvals | CE, UL, CSA, ATEX Zone 2, SIL 2 |
Typical Applications
Gas & steam turbine control (Frame 5/6/7/9)
Generator excitation & synchronization
Compressor anti-surge & load-sharing control
Emergency trip & protection systems (ETS)
Retrofit upgrades for Mark V / Mark IV panels
Package Contents
1× IS215UCVDH5A controller module
1× Factory calibration & traceability certificate
1× ESD wrist strap
Quick-install guide & slot keying chart
Installation & Setup Guide
1. Power down the Mark VI rack; follow ESD procedures.
2. Insert the card into the designated VME slot (refer to R, S, T rack map).
3. Apply torque to front-panel screws (12 in-lb / 1.4 N*m).
4. Power up and verify green STATUS LED (< 30 s).
5. Connect ToolboxST™ via Ethernet; upload latest application file (*.m6b).
6. Perform loop test and trip-check per OEM start-up sequence.
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Xiamen IntelliLink Global Electronic Products Co., Ltd
Location
Tongji Building, No. 99 Huli Avenue, Huli District, Xiamen City, Fujian Province
Contact Person
Chen