12 Channel GE Fanuc PLC IS220PVIBH1A GE Mark VIe Vibration Position Input Module
Price:
$1000-1200
MOQ:
1 piece
Delivery Time:
3-5 work days
Brand:
GE
Product Description
IS220PVIBH1A GE Mark VIe Vibration & Position Input Module
Product Snapshot
The IS220PVIBH1A is a 12-channel vibration & position input module that connects directly to accelerometers, velocity sensors and eddy-current probes without external signal conditioners. Featuring 16-bit A/D conversion, 40 kHz sample rate and integrated peak-to-peak detection, it delivers < 1% amplitude accuracy for gas- & steam-turbine shaft vibration, axial position and bearing temperature trending. With hot-swap capability, IP20 rating and -40...+70 °C operating range, it's the standard choice for plant balance-of-plant (BOP) and auxiliary skids worldwide.
Key Features & Benefits
- 12 universal channels - supports accelerometer (100 mV/g), velocity (20 mV/mm/s), and eddy-current (8 V/mm) sensors
- 40 kHz sample rate - includes anti-aliasing filter with true peak-to-peak & RMS calculation on-board
- 16-bit resolution - provides < 1% amplitude error with ±0.05% linearity
- Integrated power - supplies -24 V for probes and 4 mA constant current for IEPE sensors
- Sensor OK detection - identifies open/short circuits, bias voltage issues within 100 ms
- Hot-swap capability - slide-in design allows maintenance without turbine shutdown
- Harsh environment ready - conformal coated, operates in -40...+70 °C, withstands 5 g vibration and 50 g shock
- Global certifications - CE, UL 508, ATEX Zone 2, RoHS, REACH compliant
Technical Specifications
| Parameter | Value |
|---|---|
| Part Number | IS220PVIBH1A |
| Series | Mark VIe Distributed I/O |
| Function | Vibration & Position Input Module |
| Channels | 12 universal |
| Sensor Types | Accelerometer 100 mV/g, Velocity 20 mV/mm/s, Eddy-current 8 V/mm, ±25 V DC |
| Sample Rate | 40 kHz per channel, simultaneous |
| Bandwidth | 0.1 Hz - 16 kHz (user selectable) |
| Resolution | 16-bit (0.15 mg, 0.01 mil) |
| Accuracy | ±1% of reading @ 25°C |
| Linearity | ±0.05% |
| Sensor Supply | -24 VDC ±5%, 25 mA max per channel |
| IEPE Constant Current | 4 mA ±5%, 22 V compliance |
| Isolation | 1500 V RMS channel-to-logic |
| Power (5 V) | 400 mA typical from backplane |
| Power (24 V) | 100 mA plus sensor load |
| Dimensions (W*H*D) | 53 * 125 * 260 mm |
| Weight | 0.6 kg |
| Operating Temp | -40...+70°C |
| Storage Temp | -55...+85°C |
| Humidity | 5...95% RH non-condensing |
| Protection | IP20 (panel mount) |
Typical Applications
- Gas & steam turbine shaft vibration (X-Y probes)
- Axial thrust position monitoring
- Bearing accelerometer trending (velocity & enveloped)
- Compressor surge detection
- Balance-of-plant (BOP) auxiliary pumps & fans
Compatible Hardware
- Rack: Mark VIe IS215VPROH2BC (vertical) or IS215HPROH2BC (horizontal)
- Cable: IS200TBCVH1B (terminal board) up to 30 m away
- CPU: IS215UCVEM09A/B (redundant pair supported)
- I/O Pack: IS200DSPXH1A (DSP) plugs directly onto PVIB
- Sensors: Bently Nevada 3300 XL, Metrix SA6350, Wilcoxon 787A
Installation & Startup
- Slot module into any Mark VIe VME slot; tighten captive screws to 0.5 N*m.
- Wire sensors using shielded twisted-pair, with drain wire earthed at pack only.
- Configure via ToolboxST > I/O > PVIB > set sensor type, full-scale, and alarms.
- Verify LEDs: green "STATUS" should be steady, green "ACTIVE" flashes at 2 Hz.
- Trend data by viewing peak-to-peak, RMS, and gap voltage in HMI.
What's in the Box?
- 1 * IS220PVIBH1A vibration module, factory-sealed
- 1 * quick-start guide (English)
- 2 * M4 mounting screws & serrated washers
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Xiamen IntelliLink Global Electronic Products Co., Ltd
Location
Tongji Building, No. 99 Huli Avenue, Huli District, Xiamen City, Fujian Province
Contact Person
Chen