Custom TPU Hot Melt Adhesive DTF Hotmelt Powder For T-Shirt Heat Transfer DTF Printing

How to Use DTF Powder?
Powdering the adhesive is straightforward. It does not require complex steps and can be done in minutes. Here’s how to do it.

Applying the adhesive powder should come after printing your design onto the transfer film. You want to powder the film while the ink is wet to achieve optimal binding.
To cover the design, spread the adhesive powder evenly and in a thin coat. Some advanced DTF printers integrate an automatic powder shaker. But if you don’t have this machine, you can do it manually without a hitch.
Make sure to shake the excess powder from the film. Don’t use too thick powder, as it can affect the quality of the print.
Cure the DTF powder via a heat press, an oven, or a heat gun. Configure your heat press machine in a no-contact mode if you don’t have a curing oven.
Transfer your design onto the shirt. Configure your temperature and time depending on the type of fabric. Then, heat-press your film onto the preheated shirt. Make sure to peel off your film before pressing the transferred design again; this time, cover it with parchment paper before pressing.