Food Grade SUS304 Panel Type Water Tank with Modular Assembly Design
- Stamped Reinforced Panel Forming: Standard pressed panels (1000×1000mm / 1000×500mm / 500×500mm) with arc convex reinforcement design to improve overall compression resistance, prevent deformation under full water pressure. Panel thickness customized from 1.2mm-4mm based on tank height and capacity.
- Seamless Welding / Bolt Assembly: Two optional assembly methods: full argon arc welding for zero leakage; bolted assembly with food-grade non-toxic rubber sealing strips for easy disassembly and transportation. All connecting fasteners are also SUS304 anti-rust stainless steel.
- Internal Reinforcement Support System: Equipped with stainless steel cross bracing inside the tank to disperse water pressure, enhance structural stability, avoid wall bulging during long-term full water storage.
- Complete Standard Accessories: Pre-reserved water inlet, outlet, overflow port, sewage drain port, manhole, external maintenance ladder, supporting steel base, liquid level monitoring interface, all matching supporting flanges and pipelines.
Raw material meets drinking water contact safety standards, anti-rust, anti-corrosion, resistant to well water, purified water, tap water and light acidic/alkaline industrial water; no secondary water pollution, suitable for edible pure water storage.
Combine standard panels freely to make any length, width and height; compact square layout saves roof, equipment room and underground space, easier to arrange pipeline layout than cylindrical tanks. Capacity range from 1m³ to 2000m³ for selection.
Precision welding + high-elasticity food-grade sealing strips eliminate water seepage risk; anti-aging stainless steel material, service life over 30 years, almost no daily maintenance cost.
Panels can be split and packed separately for ocean/land transportation, avoiding oversized cargo trouble; simple assembly steps, no complex civil engineering required, short construction cycle for engineering projects.
Add polyurethane thermal insulation layer and outer stainless steel shell to make insulated hot water tank, prevent temperature loss for hotel hot water, food factory warm water storage, avoid frost crack in low-temperature outdoor environment.
Perfect matching with RO pure water equipment, EDI ultrapure water system, rural integrated drinking water purification unit, hotel central water treatment system as finished water storage buffer tank.
- Pure water storage supporting water treatment equipment
- Hotel, resort, apartment domestic drinking & hot water storage
- Rural centralized safe drinking water project supporting tank
- Factory industrial process water, boiler make-up water storage
- Fire fighting emergency water storage for buildings & workshops
- Food, beverage, cosmetic factory sterile raw water storage
- Hospital laboratory medical purified water storage
- School, villa, community daily domestic water storage
| Specification | Details |
|---|---|
| Raw Material | SUS304 food-grade stainless steel (optional SUS316L for special corrosive water) |
| Standard Panel Sizes | 1000×1000mm, 1000×500mm, 500×500mm |
| Panel Thickness | 1.2mm, 1.5mm, 2.0mm, 2.5mm, 3.0mm, 4.0mm (customized by tank height) |
| Assembly Mode | Argon arc welding / bolt modular assembly |
| Optional Functions | Polyurethane insulation layer, liquid level sensor, external ladder, manhole, anti-rust steel base |
| Custom Capacity | 1m³ - 2000m³ |
| Working Temperature | 0℃ ~ 80℃ (insulated type supports constant temperature hot water) |
| Certifications | ISO9001, drinking water sanitation safety certification |
| Warranty | 2 years whole machine warranty, lifetime technical guidance |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.