120V - 480V Electric Immersion Tank Heaters For Heating Harsh Chemicals & DI Water
- Semiconductor Fabrication
- Solar Cell Manufacturing
- Flat-Panel Display, LEDs & Electronics
- Chemicals Manufacturing
- Industrial Manufacturing
| Heater Element | Heating Coil |
|---|---|
| Wetted Surfaces | PFA/PTFE |
| Wattages | 1.0 - 20 kW |
| Voltages | 120 - 480 VAC 1 or 3 phase |
| Sizes (LxW) | 7x5 to 19x14 inch |
| Height | 1-5/8 inch |
| Temperature | 200°C (392°F) |
| Hi-Limit Sensor | Type-J thermocouple |
| Ground Wire | Encapsulated |
| Lead Wire | 15-ft |
Anodizing is an electrochemical process of converting a metal surface into an oxide layer. Mainly aluminum is used for anodizing, although other nonferrous metals, such as titanium and magnesium, can also be anodized. The metal part is connected as the anode and immersed into an acid electrolyte bath, where an electric current is applied to grow the oxide layer from the piece. The resulting surface finish will provide functional properties as corrosion-resistance and durability, as well as decorative properties.
| MOTS SINGLE - BOTTOM, DERATED Derated, low watt density, L-shaped, bottom, metal over the side Immersion Heater. Single or Three phase. Three phase. 500-6000 watts, 120-480 volts.  |
MOTS TRIPLE - L SHAPED L-shaped, bottom style metal over the side heater. Three phase. Single or three phase. 3000-36000 watts, 200-600 volts.  |
6HS SERIES - TUBULAR Over the side, 6 element, tubular heater. Three phase. 6000-21000 watts, 208-600 volts.  |
| 9HX SERIES Low watt density, 9 element fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. Three phase. 3000-18000 watts, 208-600 volts.  |
6HX SERIES Low watt density, 6 element fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. Three phase. 2000-12000 watts, 208-600 volts.  |
3HXOL SERIES Low watt density, 3 element, bottom heater. Fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. 3000-18000 watts, 208-480 volts.  |
Deionized water (DI Water) has become a crucial part of many industrial process applications' impurity removal process. Cleaning semiconductors or other ultra-clean end-use devices requires the highest level of purity to reduce product failure.
- Semiconductor
- Flat Panel Display
Heating Systems for Purified, DI Water  |
PTFE Inline Chemical Heater  |
Point of Use (POU) Heating refers to the energy-efficient heating method of placing a small heater near the processing bath to reduce heat-up wait times.
- Semiconductor Wafer Cleaning
- Etching
- Inline Chemical Heating
- Point of Use Heating (POU)
High-Purity PFA Inline Chemical Heater  |
PTFE Inline Heater  |
Inline Chemical Heater  |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.