Non Dry Burning Electric PTC Immersion Heater With Stainless Steel 304 316 Material
Price:
Contact Us
MOQ:
1 PCS
Delivery Time:
10-15 working days
Brand:
Surplus
Product Description
PTC Non-dry Burning Electric Immersion Heater
Heaters' elements are PTC positive temperature coefficient semiconductors - making the heaters self-limiting. They reach a set maximum sheath temperature (which is below the ignition point of most combustible materials), making them especially safe for process applications.
LONG ELEMENT LIFE
- PTC heater element lasts longer than conventional heaters
- Will not burn out if run in air
- Will not burn out due to scale or sludge buildup
SAFE DESIGN
- Heater self limits its maximum operating temperature to 250°C (below ignition point of most plastics)
- Will not melt tanks when a 1/2" (12mm) minimum distance is maintained
- Overtemperature protection devices are not required
- Safety is built-in, not added on
- Metal-grounded construction (earth ground)
- Non-floating construction
SPECIFICATIONS
Sizes: 1,000 watts (1kW) to 6,000 watts (6kW)
Voltages: Three ranges available: 110-120V, 200-240V, and 380-480V. Available in single or three phase power.
CORROSION RESISTANT HEADS
Vapor-resistant, flame retardant polypropylene terminal enclosures each with 3-foot (.9m) flexible PVC liquid tight conduits.
OUTSTANDING PERFORMANCE
- Watt densities of 4 watts/cm² ensure long service life
- Auto-stabilizing solid state element prevents hot spots and ensures uniform heating
- Heater derates itself in highly viscous and high temperature solutions
Consult factory for sizing assistance.
CHEMICALLY RESISTANT
For use in most aqueous alkaline, electroplating and rinse solutions. Available sheath materials:
- 304 stainless steel
- 316 stainless steel
- Titanium
Check our Solution Guide or with your chemical supplier for recommended sheath material.
CUSTOM OPTIONS
Consult factory for:
- Longer wire and conduit lengths
- Extended cold zones
- Temperature and level controls sized to match the heater
We recommend temperature controls and level controls for use with this immersion heater.
Other Applications
Electrochemical Deposition
Electrochemical Deposition is a cost-effective process using oxidation and reduction to adhere metal to a surface using electricity. The process is also sometimes referred to as Electro-Plating. Our products deliver full power supply output performance, high efficiency, high-speed DC output, connectivity, reliability, and ETL certification.
| Electrochemical Deposition Products |
|---|
|
HXSL SERIES
Custom, low watt density, fluoropolymer (PTFE) sleeved bottom heater with flexible riser. Single phase. 1000-6000 watts, 120-600 volts.
|
|
HXRL SERIES
Low watt density, fluoropolymer (PTFE) sleeved bottom heater with flexible riser. Single phase. 1000-6000 watts, 120-600 volts.
|
|
HXO SERIES
Low watt density, O shaped fluoropolymer (PTFE) sleeved 304 stainless elements inert to most solutions. 500-9000 watts, 120-600 volts.
|
Acid Heating And Corrosive Chemical Heating
Built to withstand the stress of acids or other corrosive chemicals while maintaining the highest quality and safety standards, our fluoropolymer (PTFE) heaters and exchangers are engineered to perform.
| Acid Heating And Corrosive Chemical Heating Products | ||
|---|---|---|
|
3HX Series
|
HXT SERIES - SCREWPLUG
|
9HX SERIES
|
|
6HX SERIES
|
3HXOL SERIES
|
HXSL SERIES
|
Similar Products
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.
Company
Yingxi Trading Company
Location
Room 303, Unit 2, Building 22, Pingchou District 1, Jiangdong Street, Yiwu City, Jinhua City,Zhejiang Province,China
Contact Person
Doris Lu