CE6881-48S6CQ-B CE6881-48S6CQ-F 48*10GE SFP+ 6*100GE QSFP28 48 Port Ethernet Network Switch
CE6881-48S6CQ-B CE6881-48S6CQ-F 48*10GE SFP+ 6*100GE QSFP28 48 Port Ethernet Network Switch
Description
The Ethernet Network Switch hardware configuration includes 4.8Tbps/76.8Tbps backplane bandwidth and 1600Mpps packet forwarding rate, providing 48 10GE SFP+downstream ports and 6 40/100GE QSFP28 upstream ports, supporting high-density access and large-scale data throughput. The whole machine is powered by AC/DC dual-mode power supply, with a maximum power of 380W. It supports stacking function, VLAN, QoS optimization, and is equipped with protocol based flow classification, ACL, CAR and other security mechanisms
Pictures
Specification
|
Installation Type
|
Cabinet Installation
|
|
Depth[mm]
|
420.0 mm
|
|
Chassis height[U]
|
1
|
|
Wide[mm]
|
442.0 mm
|
|
Height[mm]
|
43.6 mm
|
|
Weight without packaging[kg(lb)]
|
5.7 kg (12.6 lb) (excluding optical modules, power modules, and fan modules)
|
|
Maximum power consumption[W]
|
349 W
|
|
Typical power consumption[W]
|
- 194 W (100% throughput, SFP+ high-speed cables on 48 ports and QSFP28 high-speed cables on 6 ports, dual power modules)
- 240 W (100% throughput, short-distance optical modules on all ports, dual power modules) |
|
Static power consumption[W]
|
161 W
|
|
Heat dissipation mode
|
Air cooling
|
|
Maximum heat dissipation[BTU/hour]
|
1191 BTU/hour
|
|
Typical heat dissipation[BTU/hour]
|
- 662 BTU/hour (100% throughput, SFP+ high-speed cables on 48 ports and QSFP28 high-speed cables on 6 ports, dual power modules)
- 819 BTU/hour (100% throughput, short-distance optical modules on all ports, dual power modules) |
|
Static heat dissipation[BTU/hour]
|
549 BTU/hour
|
|
Power supply mode
|
DC pluggable,AC pluggable,HVDC pluggable
|
|
Rated input voltage[V]
|
- 600 W AC&240 V DC power module: 100 V AC to 240 V AC, 50/60 Hz; 240 V DC
- 1000 W DC power module: –48 V DC to –60 V DC - 1200 W high-voltage DC power module: 240 V DC to 380 V DC |
|
Input voltage range[V]
|
- 600 W AC&240 V DC power module: 90 V AC to 290 V AC, 45 Hz to 65 Hz; 190 V DC to 290 V DC
- 1000 W DC power module: –38.4 V DC to –72 V DC - 1200 W high-voltage DC power module: 190 V DC to 400 V DC |
|
Maximum input current[A]
|
- 600 W AC&240 V DC power module: 8 A (100 V AC to 240 V AC); 4 A (240 V DC)
- 1000 W DC power module: 30 A (–48 V DC to –60 V DC) - 1200 W high-voltage DC power module: 8 A |
|
Rated output power[W]
|
- 600 W AC&240 V DC power module: 600 W
- 1000 W DC power module: 1000 W - 1200 W high-voltage DC power module: 1200 W |
|
Memory
|
DRAM: 4 GB
|
|
NOR Flash
|
64 MB
|
|
NAND Flash
|
4 GB
|
|
USB
|
Supported
|
|
Console port
|
RJ45
|
|
Downlink Service interface
|
48*10GE SFP+
Note: 1. 10GE ports can be configured to work at 1 Gbit/s. Ports 13-16 and 25-28 can be configured to work at 10 Gbit/s or 1 Gbit/s using commands, and the speed of other ports can be auto-negotiated based on optical modules. (In V200R005C20, ports 13-16 and 25-28 cannot be configured to work at 1 Gbit/s. In V200R019C10 and later versions, they can be configured to work at 1 Gbit/s.) 2. 10GE LRM/80 km linear optical modules are not supported. 3. 10GE 1 m/3 m/5 m copper cables are supported. |
|
Uplink Service interface
|
6*100GE QSFP28
Note: 1. Each 100GE QSFP28 port can be configured to work at 40 Gbit/s. |
|
Service port supporting the stack function
|
10GE optical ports and 100GE optical ports
|
|
RTC
|
Supported
|
|
Switching capacity[bps,bit/s]
|
For more details, see the datasheet/brochure or contact product sales personnel.
You can obtain the datasheet/brochure from the following link: |
|
Redundant fans
|
The device supports 3+1 backup of fan modules that work in hot standby mode. The system can operate properly for a short period of time after a single fan module fails. You are advised to replace the faulty fan module immediately.
|
|
Redundant power supply
|
1+1 backup
|
|
Number of power modules
|
2
|
|
Power supply surge protection
|
- AC: 6 kV in common mode and 6 kV in differential mode
- DC: 4 kV in common mode and 2 kV in differential mode - HVDC: 4 kV in common mode and 2 kV in differential mode |
|
Types of fans
|
Pluggable
|
|
Number of fan modules
|
4
|
|
Airflow direction
|
Front-to-back or back-to-front, depending on the fan modules and power modules.
|
|
Storage temperature[°C(°F)]
|
-40°C to +70°C (-40°F to +158°F)
|
|
Long-term operating temperature[°C(°F)]
|
0°C to 40°C (32°F to 104°F) at an altitude of 0–1800 m (0–5906 ft.)
Note: When the altitude is 1800–5000 m (5096–16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). |
|
Storage relative humidity[RH]
|
5% RH to 95% RH, non-condensing
|
|
Long-term operating relative humidity[RH]
|
5% RH to 95% RH, non-condensing
|
|
Storage altitude[m(ft.)]
|
< 5000 m (16404 ft.)
|
|
Long-term operating altitude[m(ft.)]
|
≤ 5000 m (16404 ft.)
|
|
MTBF[year]
|
45.9 years
|
|
MTTR[hour]
|
1.57 hours
|
|
Noise at high temperature (40°C, sound pressure)
|
- Front-to-back airflow: < 75 dB(A)
- Back-to-front airflow: < 74 dB(A) |
|
Noise at normal temperature (27°C, sound pressure)
|
- Front-to-back airflow: < 58 dB(A)
- Back-to-front airflow: < 57 dB(A) |
|
Availability
|
0.9999960856
|
Our Service
100% Low Price Guarantee:
networks-equipments.com provides high-quality products at low wholesale prices
100% Quality Assurance:
All items are brand new and factory-sealed.For added assurance, each unit can be fully tested and verified to be in perfect working condition by engineer—upon your request.
100% Money Back Guarantee:
If your returns meet our relevent standards,you can contact our customer service team to exchange or return any product that you bought from us.
Professional Technical Support:
networks-equipments.com experienced technical team can provide support over the phone, by chat, by email or by remotely login.
FAQ
1. Why choose us?
We are the leading Chinese supplier of quality networking equipments and we have over 10 years experience in this field.
2. What's the quality of the products?
All the items are brand original.
3. How to place an order?
After customer confirm the order , we will create an order as your request. We accept many terms of trade such as T/T,Wester,Union, Orders, Alipy and etc.
4. How about the shipment?
We deliver products by FEDEX, DHL, ARAMEX, EMS, UPS, TNT and Air shipping & Ocean transportation. We are also able to deliver goods to your forwarder in China if you need.
5. How about the warranty?
1 Year warranty.
6. Do you test all your goods?
A: Yes, we have professional engineer to test all devices before shipping.
7. What if machine not work during warranty?
Technical support avaliable,if can't fixed, replacement or return with full refund acceptable.
8. How about your main products?
Our product lines include Switches, Routers, Server, SFP Modules, OLTs, SDHs, Network Modules, Interface Cards, Security Firewalls, Wireless AP etc.
9. What brand of products do you offer?
A: We can provide all common brands in the market
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.