Universal Stringing Block with Dual-Use Hanging or Sitting Installation, Aluminum and Nylon Sheave Options, Lightweight 1.4-3.5 kg Model Range
Product Introduction
Sitting and Hanging Type Universal Conductor Stringing Block is designed for overhead line stringing work where the block type, sheave material, rated load, and cable or conductor range must match the site operation.
Source-based positioning: Single sheave conductor stringing block for aerial cable/conductor stringing.
Application evidence: Used for conductor stringing operation; can be suspended with hook fitting or used on cross arms.
Parameter evidence: Aluminum sheave and nylon sheave options; rated load 5-20 kN; sheave sizes Φ80×50 to Φ160×40 and Φ120×58; listed weight 1.4-3.5 kg.
Application Areas
· overhead conductor stringing
· cross arm stringing work
· aerial cable installation
· transmission line construction
Product Advantages
· dual-use hanging or sitting installation
· aluminum and nylon sheave options
· lightweight 1.4-3.5 kg model range
· model selection by load and sheave size
Selection Guidance
· Confirm whether the task is conductor stringing, aerial cable rolling, OPGW/fiber optic cable guidance, grounding, or corner pulling.
· Match the model to rated load, sheave size, cable/conductor diameter, and installation position.
· Do not use category or tag keywords as technical claims unless the source table supports them.
· For corner, optical cable, or grounding work, verify bend radius, grounding current, sheave material, and conductor range before publishing final specifications.
Specifications
|
Item No. |
Model |
Sheave Size (mm) |
Rated Load (kN) |
Weight (kg) |
Remark |
|
10261 |
SHC-80×50 |
Φ80×50 |
5 |
1.9 |
Aluminum sheave |
|
10262 |
SHC-120×30 |
Φ120×30 |
5 |
2.1 |
Aluminum sheave |
|
10263 |
SHC-160×40 |
Φ160×40 |
10 |
2.5 |
Aluminum sheave |
|
10264 |
SHC-120×58 |
Φ120×58 |
20 |
3.5 |
Aluminum sheave |
|
10271 |
SHCN-80×50 |
Φ80×50 |
5 |
1.4 |
Nylon sheave |
|
10272 |
SHCN-120×30 |
Φ120×30 |
5 |
1.6 |
Nylon sheave |
|
10273 |
SHCN-160×40 |
Φ160×40 |
10 |
2.0 |
Nylon sheave |
|
10274 |
SHCN-120×58 |
Φ120×58 |
20 |
2.5 |
Nylon sheave |
FAQ
Q: How should this product be selected?
A: Select by application first, then confirm rated load, sheave size or conductor/cable range, weight, and sheave material from the specification table.
Q: Can I use all page tags as SEO keywords?
A: Use tags as secondary keywords only when they match the visible product and parameter table. Exclude terms listed in the correction section.
Q: What parameter evidence supports reliability claims?
A: Aluminum sheave and nylon sheave options; rated load 5-20 kN; sheave sizes Φ80×50 to Φ160×40 and Φ120×58; listed weight 1.4-3.5 kg.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.