The YE0437A08 features a 4.37-inch long-strip active area (38.19×104.16mm) with 176×480 resolution (117 DPI), supporting 4-color display for refined information classification. Its optical performance is excellent: white state L*=63~65, black state L*=9~14, red state L*=25~28 (a*=38~40), yellow state L*=55~62 (b*=63~68), white reflectance 30~35%, and contrast ratio 10:1 typ. The pure reflective mode saves power by eliminating backlighting, while the hard-coat antiglare surface reduces glare under direct sunlight. With an ultra-wide viewing angle, there’s no color or brightness deviation from any direction, supporting multi-person viewing for long shared devices.

Powered by bi-stable technology, the module only consumes power during updates (max 150mAs at 25℃) and draws ≤3μA in deep sleep. A standard lithium battery can power daily-updated long devices for over 12 months, reducing battery replacement frequency. It integrates the IST7163CA1-C driver IC with on-chip booster/regulator, generating VCOM, Gate (VGH/VGL), and Source (VSH1/VSH2/VSL) voltages internally, simplifying external circuits. The internal temperature sensor enables real-time waveform adjustment, ensuring stable operation in 0~40℃. It passed rigorous reliability tests, including 240-hour high/low-temperature storage, 168-hour high-humidity operation, and 50 temperature cycles (-25℃~60℃), ensuring long-term use.

The module supports 3-wire/4-wire SPI (selectable via BS pin), compatible with most MCUs and embedded systems—no complex drivers needed. Pins 6 and 7 on FPC are pre-grounded (no need for external handling). The 24-pin 0.5mm ZIF Socket enables quick, secure installation. Waveform is stored in on-chip OTP, supporting custom programming. The flexible FPC (0.10±0.03mm) with stiffener simplifies installation in non-flat long device layouts, reducing development cycle and cost.

With an outline of 46.6×115.86×0.90mm, the YE0437A08 is tailored for long-strip device integration. The hard-coat antiglare surface resists scratches and fingerprints, while ROHS2.0+HF+REACH compliance meets global environmental standards. It supports transportation temperature -25~60℃ (10 days) and storage temperature -25~60℃ (max 5 years), adapting to harsh environments like cold storage, warehouses, or outdoor retail. It passed vibration testing (1.04G, 10~500Hz) and drop impact (100cm height on concrete), ensuring durability during transportation and use. The 5-year design life (25℃/60%RH, daily updates) guarantees long-term reliable operation for long electronic shelf labels and industrial devices.