1.05" 120×240 IPS Screen 4-Pin SPI 400cd/m² for Smart Devices
This 1.05 inch IPS TFT LCD display module offers 120*240 resolution, 4-Wire SPI interface, 400cd/m² high brightness and full viewing angle. Designed with normally black mode, 262K colors and wide temperature range, it delivers stable performance for wearables, handheld devices, industrial controls, smart home and portable electronics.
| Product | 1.05 inch IPS TFT LCD Module | Display Type | IPS TFT, Normally Black |
|---|---|---|---|
| Resolution | 120(RGB)*240(V) Pixels | Display Colors | 262K Colors |
| Brightness | 400 cd/m² (Typical) | Outline Dimensions | 14.25*28.60*1.56 mm |
| Viewing Direction | Full Viewing Angle (ALL) | Active Area | 11.88*23.76 mm |
| Interface | 4-Wire SPI | Operating Temperature | -20℃ to +70℃ |
| Driver IC | GC9A01 | Storage Temperature | -30℃ to +80℃ |
| Pixel Pitch | 0.099*0.099 mm | Contrast Ratio | 800:1 (Typical) |
| Response Time | 30 ms (Typical) | Touch Panel | Without Touch |
| Supply Voltage | 2.5V~3.3V (Typ 2.8V) | Compliance | RoHS Compliant |
- 1.05-inch compact IPS TFT LCD with 120*240 high resolution
- Full viewing angle (ALL directions) for clear image from any angle
- 400cd/m² high brightness for excellent readability in various environments
- 4-Wire SPI interface for stable communication and easy control
- 262K full color display with RGB vertical stripe arrangement
- Normally black display mode with high contrast up to 800:1
- Wide operating temperature range for industrial & outdoor applications
- Ultra-thin module design for easy integration into small devices
- RoHS compliant to meet international environmental standards
- Long-term reliability with strict reliability testing passed
Analog supply voltage VCC: 2.5V ~ 3.3V (Typical 2.8V)
Backlight forward voltage: 2.9V ~ 3.1V (Typical 3.0V)
Backlight forward current: 20mA (Typical)
Input high voltage: ≥0.7*IOVCC; Input low voltage: ≤0.3*IOVCC
Operating current: Stable within rated range for long-term use
ESD protection design to prevent damage from static electricity
| PIN | Symbol | Description |
|---|---|---|
| 1 | NC | No connect |
| 2 | NC | No connect |
| 3 | SDA | SPI interface input/output pin |
| 4 | SCL | Serial interface clock |
| 5 | D/C | Display data/command selection pin |
| 6 | RESX |
This signal will reset the device and it must be applied to properly initialize the chip. -Signal is active low
|
| 7 | CSX | Chip selection pin, Low enable. Highdisable. |
| 8 | GND | Ground |
| 9 | NC | No connect |
| 10 | VCC |
Power supply for Analog
|
| 11 | LED-K | Backlight cathode |
| 12 | LED-A | Backlight anode |
| 13 | GND | Ground |
- Smart wearable devices: smart watches, wristbands, fitness trackers
- Handheld industrial instruments, measuring meters and testing equipment
- Portable electronics: voice recorders, small smart gadgets, beauty devices
- IoT terminals and smart home sensor display modules
- Medical: portable health monitors and small diagnostic devices
- Industrial control: small HMI, equipment status indicators
- Consumer electronics: electronic toys, pedometers, small home appliances
- FPC Design: Custom FPC length, pin layout and interface direction
- Brightness Customization: Adjust brightness level for special environments
- Interface Configuration: SPI timing and driver code adaptation
- Mechanical Adjustment: Outline and installation structure customization
- Packaging Service: Anti-static vacuum packaging with desiccant
- Mass Production Support: Flexible MOQ and lead time for bulk orders
Each product undergoes strict testing before shipping following MIL-STD-105E sampling plan and multiple reliability tests including high/low temperature storage, high temperature & high humidity operation and image sticking test.
Yes, we provide samples for customer evaluation and functional testing.
Typically 7 working days after payment confirmation for standard orders. Custom orders may require additional lead time.
200 piece minimum order quantity for sample orders, with flexible MOQ for bulk production.
Contact us immediately for investigation and prompt resolution. We offer replacement or refund for confirmed quality issues.
Comprehensive range including LCD modules, LCM, touch modules, LCD panels, FPC boards and optoelectronic materials for industrial, medical, automotive, smart home and consumer electronics applications.
We accept T/T (Telegraphic Transfer) payments, Western Union, and PayPal for small orders.
DHL, FedEx, UPS and China Post shipping services available. Express delivery is available for urgent orders.
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.