Leuze FT328.34P-M12 | Fork Sensor 30mm Gap, PNP NO/NC, M12
Leuze FT328.34P-M12 thru-beam fork photoelectric sensor. 30mm gap, 5µm resolution, PNP push-pull NO/NC, M12 4-pin, 10-30V DC, IP67, for label / part detection.
Product Overview
The Leuze FT328.34P-M12 (often listed as FT 328.34P-M12) is a thru-beam fork-type photoelectric sensor from the FT 328 series, designed for precise detection of small parts, labels, punches, or web edges in a fixed mechanical gap. It features a 30 mm fork opening (gap), PNP push-pull output (NO/NC selectable), and an M12 4-pin connector. The emitter and receiver are permanently aligned inside the U-shaped fork — no alignment or adjustment is required, making it ideal for high-speed registration mark and label detection on packaging lines.
Technical Specifications (Optical & Electrical)
|
Parameter
|
Specification
|
|
Model / Order Code
|
FT328.34P-M12 (Leuze FT 328 Series)
|
|
Sensing Mode
|
Thru-Beam Fork (Fixed Emitter–Receiver Pair)
|
|
Fork Opening (Gap / Slot Height)
|
30 mm
|
|
Fork Width (Detection Zone Depth)
|
~42 mm (typical for FT328)
|
|
Light Source
|
Red LED (Visible, 660 nm)
|
|
Supply Voltage
|
10 … 30 V DC
|
|
Output Type
|
PNP Push-Pull, Light/Dark Switchable (NO or NC)
|
|
Switching Current
|
≤ 100 mA
|
|
Response Time
|
≤ 30 µs (High-Speed Version — typical of FT328)
|
|
Resolution (Min. Object Size)
|
~0.05 mm (wire / edge detection) / Label detection ≥ thickness detectable
|
Technical Specifications (Mechanical & Environmental)
|
Parameter
|
Specification
|
|
Housing Material
|
Anodized Aluminum / Zinc Die-Cast (Fork Arms), Plastic Endcaps
|
|
Mounting Holes
|
M4 or M5 clearance holes on rear/front face (per FT328 drawing)
|
|
Connection
|
M12, 4-pin Plug Connector (A-coded)
|
|
Protection Rating
|
IP67 (EN 60529)
|
|
Operating Temperature
|
-20 … +60 °C
|
|
Vibration / Shock Resistance
|
IEC 60068-2-6 / 2-27
|
|
EMC / Standards
|
EN 60947-5-2, CE
|
|
Weight (Approx.)
|
0.08 kg
|
Key Features
-
Pre-Aligned Fork Design: Emitter and receiver are factory-aligned — no field adjustment, no drift, no alignment drift over time.
-
Ultra-Fast Response: Sub-100 µs switching enables detection of high-speed registration marks, perforations, or flying parts on fast packaging machinery.
-
Compact 30mm Gap: Accommodates labels on backing paper, small parts, or wire passing through the slot — also usable for double-sheet detection in feeder stations.
-
M12 Standard Interface: 4-pin A-coded connector matches common sensor cabling — simplifies spare parts and replacement.
Applications
-
Label Detection: Sensing clear/opaque labels on a carrier web (transparent backing) by detecting the label's opacity difference from the liner.
-
Registration Mark Reading: Detecting printed eye-mark or notch on film/web for cut-to-length or print-registration.
-
Small Part Verification: Confirming a tiny component has dropped into a nest or passed through a chute.
-
Double-Sheet Detection: Detecting if one or two sheets have been picked from a stack in feeder/collator machines.
Note: For NPN output of the same fork, see FT328.34N-M12. For larger gaps (50 mm, 80 mm, 120 mm) in the same FT series, see FT350 / FT380 families. The M12 connector requires a mating M12 cable (e.g., Leuze VK or generic A-coded M12).
