Festo MHP2-MS1H-5/2-M5 | 5/2 Solenoid Valve MHP2 Series, G1/8, 24V DC, M5 Pilots
Festo MHP2-MS1H-5/2-M5 5/2 way single solenoid valve. MHP2 series, G1/8 main ports, M5 pilot ports, 24V DC (MS1H), spring return/exhaust, 500 L/min, IP65.
Product Overview
The Festo MHP2-MS1H-5/2-M5 is a single-solenoid 5/2-way directional control valve from the compact MHP2 series, designed for controlling double-acting pneumatic actuators. It features G1/8" main air ports, M5 pilot exhaust/Supply ports, and is fitted with a 24 V DC solenoid coil (MS1H type). The valve is monostable (spring return to home position on de-energization) and is suitable for individual mounting or manifold assembly in machine automation panels.
Technical Specifications (Pneumatic & Performance)
|
Parameter
|
Specification
|
|
Model / Order Code
|
MHP2-MS1H-5/2-M5
|
|
Series
|
Festo MHP2 (Compact 5/2 or 5/3 Spool Valve)
|
|
Function
|
5/2 Way — Single Solenoid, Spring Return (Monostable)
|
|
Port Size (Main Air)
|
G1/8" (BSP Parallel Female)
|
|
Pilot Port Thread
|
M5 (Pilot Supply & Pilot Exhaust — typically both exhausted to atmosphere)
|
|
Nominal Flow (Qn @ 6 bar, Δp=1 bar)
|
Approx. 500 L/min
|
|
Operating Pressure
|
2 … 10 bar (Typical for MHP2)
|
|
Switching Time (Energize / De-energize)
|
≤ 15 ms (Typical — load dependent)
|
|
Manual Override
|
Push-button (Flush / Lockable) — for commissioning/test
|
Technical Specifications (Electrical & Mechanical)
|
Parameter
|
Specification
|
|
Solenoid Coil Designation
|
MS1H — 24 V DC, ~1.2 W (Typical), LED + Varistor Protection
|
|
Electrical Connection
|
Multi-pin / Single Plug (Depending on manifold — standalone: M8 or flying leads may be used; MHP2 single valve often has M8 3-pin or 2x M8 for dual solenoid)
|
|
Housing Material
|
Anodized Aluminum (Body), PA / POM (End Covers)
|
|
Seal Material
|
NBR (Standard)
|
|
Ambient Temperature
|
-5 … +50 °C (Valve), Coil -5 … +40 °C (typical)
|
|
Protection Rating
|
IP65 (With properly mated connector)
|
|
Mounting
|
Individual (Through-holes) or Manifold (MHP2 manifold base — ordered separately)
|
|
Weight (Approx.)
|
0.18 kg
|
Key Features
-
Compact MHP2 Footprint: Space-saving design for high-density valve terminals — also available in manifold (CPV/MHP2) configurations.
-
Spring Return Safety: On loss of power or air, the spool returns to home position (typically Exhaust Port 4, Pressurize Port 2 — check port labeling on your manifold) — provides fail-safe behavior for clamp/hold applications.
-
M5 Pilot Ports: Small pilot port threads allow neat wiring in tight panels; pilot exhaust is typically vented to atmosphere or collected in a common exhaust manifold.
-
Manual Override: Built-in push-button allows hand-actuation during setup without energizing the coil.
Applications
-
Double-Acting Cylinder Control: Extend/retract control of ISO 6432 (∅12–∅32 mm) or small ISO 15552 cylinders on pick-place and clamping stations.
-
Machine Safety Air Isolation: Spring-return ensures air is dumped from the "dangerous" side of the cylinder on E-STOP or guard open (when plumbed accordingly).
-
Test Rigs & Jigs: Compact individual valve for localized actuator control with manual override for trial runs.
-
Manifold Expansion: Can be added to an existing MHP2 manifold (check slot width compatibility — MHP2 = 18 mm wide per station).
Note: For double-solenoid (bistable / memory) version see MHP2-MD1H-5/2-M5. The M5 pilot ports differentiate this from larger CPV series which use G1/8 pilot ports. Manifold base (e.g., MHP2-FB-G18-FB…) and silencers (UM-…-M5) are ordered separately if not using a prefabricated manifold assembly.
About ACH
Founded in 2012, ACH is a top-tier distributor of industrial automation products, supplying genuine devices from leading brands like ABB, P+F, E&H, AB, MTL to emerging markets worldwide. Our mission is to provide 100% Genuine products at the most competitive prices, helping customers reduce costs and strengthen their market position.
![ACH industrial automation products]()
Frequently Ask & Questions
Are preferential prices available?
Long-term brand partners can get competitive product prices. At the same time, ACH controls the profit per order to 5%, providing the most competitive prices.
Are the Products Genuine OEM Units?
Yes, all products from ACH are certified genuine OEM units. We acquire our inventory through official OEM channels and trusted third-party suppliers, ensuring every item is authentic and reliable.
How will you arrange shipment?
We'll handle the shipping for you. Through our partnerships, we can secure competitive rates with major carriers like FedEx, DHL, TNT, and UPS, ensuring a smooth and cost-effective delivery.
What is the warranty of goods?
One-year Warranty.
How long is the logistics cycle of the product?
Products are divided into spot and futures, and the delivery period of different brands of products is also different. For details, please contact the ACH business manager.
