Depot Optimized Temporary Perimeter Fencing Stackable Ballast Rapid Deploy System
Depot-Optimized Temporary Security Fence Stackable Ballast Rapid-Deploy System
Product Information:
This Depot-Optimized Temporary Security Fence combines robust welded mesh panels with stackable water-fill HDPE ballast to create a rental-friendly perimeter product. Panels ship flat on pallets while ballast blocks nest to minimize depot footprint and reduce transport mass — empty blocks are handable by a single operator and filled on site to provide required stability. Industry moves toward stackable ballast reflect measurable savings in freight and storage compared with sandbags or concrete units.
Characteristics
Panels are hot-dip galvanized for corrosion resistance and can be polyester powder coated or PVC-coated for extended life. Connection options include quick-fit clamps, snap-locks or carriage-bolt systems with tamper pins for higher-risk sites. Ballast strategy is modular: HDPE blocks for fast events, steel boxes for permanent hardstanding runs. The system is designed so damaged panels or clamps are field-replaceable to reduce downtime for rental fleets.
Advantages / Selling Points
Depot efficiency: Nested ballast + palletized panels lower return freight and warehousing cost, increasing fleet utilization.
Rapid install: Pre-drilled posts and quick clamps enable two-person crews to erect long runs quickly; single-person handling of empty ballast lowers crew strain.
Compliance support: Each delivery includes a Job-Pack with ballast/spacing tables and daily inspection checklists so installers can meet local stability and safety requirements (refer to applicable standards for site wind design).
Application / Usage
Designed for events, construction hoardings, emergency cordons, site security and rental fleets. For exposed or coastal sites, Job-Pack guidance recommends increased ballast mass, reduced panel spacing or steel ballast boxes; engineer verification against local wind loads is advised. Daily inspection and clamp torque checks should be performed as part of site handover and throughout the hire period.
Specification Table
| Attribute | Typical / Notes |
|---|---|
| Panel Size | 2400 × 2000 mm (std) |
| Mesh Aperture | 50×100 / 50×150 / 75×75 mm |
| Frame | HDG tubular steel |
| Ballast | HDPE stackable blocks 20–50 L / steel boxes |
| Connections | Quick-fit / snap-lock / carriage bolt |
| Packing | Palletized; ballast nested |
| Sample Lead Time | 7–12 days |
Technical Data
| Item | Typical |
|---|---|
| Finish | HDG (option: powder 40–80 µm) |
| Ballast Block Volume | ~20–50 L each |
| Pallet Load | Panels + nested ballast (varies by height) |
| Wind Guidance | Follow local standard / Job-Pack (engineer verify) |
| Maintenance | Daily clamp/ballast checks; replace worn clamps |
Get in Touch
Have questions about our products or want to discuss a custom order? Our team is ready to help you.