Features:

1. Blends easily and harmoniously with the natural surroundings.
2. Low cost
3. Good resistance to natural forces
4. Can withstand unpredictable movement or settlement without loss of stability
5. Permeable
6. Simple and fast installation
7. Quality finish and appearance
8. Quick and cheap to install

1.Open the cage on a flat ground and lay it flat. Note: Wear goggles, gloves and other protective equipment during construction.
2. Stand up each side and combine them into a mesh box. Each surface of the mesh box has thicker edge wires, and these overlapping
thick edge wires are twisted together at the corners of the mesh surface. These twisted edge wires overlap with the binding wires at the corners.
Robust Galvanized Woven Mesh Cage for Stone Filled Retaining Gabion Structures
Robust Galvanized Woven Mesh Cage for Stone Filled Retaining Gabion Structures
3. Tie the surfaces together. Use a 1-meter-long binding wire, tie it at one end first, then pass it through the mesh every 100mm, and alternately wrap two adjacent edge wires in single and double circles. In order to ensure a tight connection between the mesh surfaces, use force and tighten them when winding.Note: If there are partitions inside the cage, tie them up according to the above method.
4. If gabions of the same size need to be connected together (to form a gabion retaining wall), connect the end of the first one to the front of the second one, and so on. Place a simple wooden "H" shape at 1/3 of the height of the inner side of the last
gabion, and stretch the other side to make it tight until all the gabions are in a stretched and tight state.